•
Press LL@) P ICT to leave the EDIT environment.
•
Press @CANCL to return to the PLOT WINDOW environment. Then, press
$ , or L@@@OK@@@, to return to normal calculator display.
Slope fields
Slope fields are used to visualize the solutions to a differential equation of the
form y' = f(x,y). Basically, what is presented in the plot are segments
tangential to the solution curves, since y' = dy/dx, evaluated at any point (x,y),
represents the slope of the tangent line at point (x,y).
For example, to visualize the solution to the differential equation y' = f(x,y) =
x+y, use the following:
•
Press „ô, simultaneously if in RPN mode, to access to the PLOT
SETUP window.
•
Change
to
TYPE
Slopefield.
•
Press ˜ and type 'X+Y' @@@OK@@@.
•
Make sure that 'X' is selected as the
variables.
•
Press L@@@OK@@@ to return to normal calculator display.
•
Press „ò, simultaneously if in RPN mode, to access the PLOT
WINDOW screen.
•
Change the plot window ranges to read:
5
•
Press @ERASE @DRAW to draw the slope field plot.
@LABEL @MENU to see the plot unencumbered by the menu and with
identifying labels.
•
Press LL@) P ICT to leave the EDIT environment.
and 'Y' as the
Indep:
X-Left:-5, X-Right:5, Y-Near:-5, Y-Far:
Press @EDIT L
Depnd:
Page 12-34