Selecting Properties Of The Line Editor; Selecting Properties Of The Stack - HP 49g+ User Manual

additional fonts that you may have created (see Chapter 23) or downloaded
into the calculator.
Practice changing the display fonts to sizes 7 and 6. Press the OK soft menu
key to effect the selection. When done with a font selection, press the @@@OK@@@
soft menu key to go back to the CALCULATOR MODES input form.
to normal calculator display at this point, press the @@@OK@@@ soft menu key once
more and see how the stack display change to accommodate the different font.

Selecting properties of the line editor

First, press the H button to activate the CALCULATOR MODES input form.
Within the CALCULATOR MODES input form, press the @@DISP@ soft menu key
(D) to display the DISPLAY MODES input form. Press the down arrow key,
˜, once, to get to the Edit line. This line shows three properties that can be
modified. When these properties are selected (checked) the following effects
are activated:
_Small
_Full page
_Indent
Detailed instructions on the use of the line editor are presented in Chapter 2 in
this guide.

Selecting properties of the Stack

First, press the H button to activate the CALCULATOR MODES input form.
Within the CALCULATOR MODES input form, press the @@DISP@ soft menu key
(D) to display the DISPLAY MODES input form. Press the down arrow key,
˜, twice, to get to the Stack line. This line shows two properties that can be
modified. When these properties are selected (checked) the following effects
are activated:
_Small Changes font size to small. This maximized the amount of
information displayed on the screen. Note, this selection
overrides the font selection for the stack display.
_Textbook Display mathematical expressions in graphical mathematical
notation
Changes font size to small
Allows to place the cursor after the end of the line
Auto intend cursor when entering a carriage return
To return
Page 1-27