Video Out Overview; Video Out Connection Overview - HP z560 User Manual

Video Out Connection Overview

The back panel connector that you hook up to your TV is
labeled Video Out.
Choose a Video Out connector and corresponding cable
that attaches to the back of your TV:
Standard definition television:
Component (Y, Pb, Pr)
■
High definition capable plasma, LCD,
or HDTV display:
Component (Y, Pb, Pr)
■
VGA
■
HDMI
■
Monitor:
VGA
■
HDMII
■
Component video output requires specific
configurations for certain display types and
resolutions. Go to http://www.hp.com/
support and select your model number for
instructions on using component video.
58
HP Digital Entertainment Center

Video Out Overview

n
The type of video cable you need depends on your TV:
For component video, see "Component Video
■
Settings" on page 60.
To connect a TV to the HP Digital Entertainment Center,
you may need a video cable and an audio cable. Use
a video cable to connect the Video Out on the HP Digital
Entertainment Center to your TV Video In. These cables
are included in the box. You may need other or
additional cables, depending on your TV or monitor.
When using an AV receiver, the Video Out cable can be
connected directly to a TV and just the audio is connected
and switched through an AV receiver, or video and audio
are connected and switched through an AV receiver.
Not all AV receivers support signal conversion.
Some HP Digital Entertainment Center models output
NTSC only.
To connect video equipment with DVI-D
connectivity, use the provided DVI-D to HDMI
adapter.
n