Adjusting The Display In Media Center - HP z560 User Manual

Adjusting the Display in Media Center

Before you begin, verify that the video equipment is
properly connected to the HP Digital Entertainment Center
and turned on, and ensure that your TV screen is set to
normal mode (not letter-box, wide, or re-sized).
Refer to the TV/Display Setup Guide for more
detailed information about adjusting the
Display.
To adjust the video settings in Media Center:
1
Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
2
Click More Programs, HP Settings, and then
Video Settings.
3
Click Display/Connection Wizard.
4
Verify that the video equipment is properly connected
to the HP Digital Entertainment Center and turned on.
Click Next.
You may also need to perform the HDTV
Overscan procedure, depending on the type
of TV/display and video connection.
5
Follow the onscreen instructions. The options vary
depending on which Video Out connection you use
(HDMI, VGA, or component).
144
HP Digital Entertainment Center
n
n