Optical Drive - HP 510 Maintenance And Service Manual

Optical drive

NOTE
Description
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
DVD±RW/R and CD-RW Double-Layer Combo Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
5. Remove the memory/Mini PCI card module compartment cover (see
on page
Remove the optical drive:
1. Position the computer with left side toward you.
2. Remove the Phillips PM2.0×9.0 screw (1) that secures the optical drive to the computer.
3. Use a flat-bladed tool to push the metal tab (2) toward the left side of the computer. (The optical
drive partially removes from the optical drive bay.)
4. Remove the optical drive (3) from the computer.
5. If it is necessary to replace the optical drive bracket, remove the two Phillips PM2.0×3.0 screws
(1) that secure the bracket to the optical drive.
36 Chapter 5 Removal and replacement procedures
All optical drive spare part kits include an optical drive bezel and optical drive bracket.
Battery on page
32).
Spare part number
438523-001
438524-001
29).
Memory module
ENWW