Computer Feet; Memory Module - HP 510 Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for 510:
- Quickspecs (15 pages) ,
- Reference manual (102 pages) ,
- User manual (27 pages)
Table of Contents
Advertisement
Computer feet
Description
Rubber Feet Kit
The computer feet are adhesive-backed rubber pads.
Memory module
Description
1-DIMM, PC2-4200, 512-MB
1-DIMM, PC2-4200, 256-MB
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Remove the external memory module:
1.
Position the computer with the rear panel toward you.
2.
Loosen the Phillips PM2.5×6.0 screw (1) that secures the memory/Mini PCI card module
compartment cover to the computer.
32
Chapter 5 Removal and replacement procedures
Battery on page
29).
Spare part number
438557-001
Spare part number
438546-001
438545-001
ENWW
Hide quick links:
Advertisement
Table of Contents
