HP 510 Maintenance And Service Manual page 62

2. Lift the processor (2) straight up and remove it.
NOTE
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Speaker
Description
Speaker
Before removing the speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/Mini PCI card module compartment cover (see
c. Optical drive (see
d. Switch cover (see
e. Keyboard (see
f. Display assembly (see
g. Base enclosure (see
56 Chapter 5 Removal and replacement procedures
The gold triangle (3) on the processor should be aligned with the triangle (4)
Battery on page
Hard drive on page
Optical drive on page
Switch cover on page
Keyboard on page
Display assembly on page
Base enclosure on page
29).
30)
Memory module on page
36)
38)
40)
44)
49)
Spare part number
441627-001
32)
ENWW