Long Term Event History - Directed Electronics PYTHON 1090 Installation Manual

Hide thumbs Also See for PYTHON 1090:

long term event history

The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees a

full trigger, the older of the two triggers in memory will be replaced by the new trigger. To access long term

event history:

NOTE: The Warn Away triggers are not stored to memory and will not be reported.

With the ignition off, press and HOLD the Valet/Program switch.

Turn on the ignition.

Release the Valet/Program switch.

Press and release the Valet/Program switch within 5 seconds. The

LED will flash in groups indicating the last two zones that triggered

the unit for one minute or until the ignition is turned off. Refer to

table of zones.

Table of Contents

Do you have a question about the PYTHON 1090 and is the answer not in the manual?