Home Accents Holiday 24RT17824181 Use And Care Manual

Safety Information
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 7.2 Watts (0.06 Amps). Do not overload. Do not connect to another lighting string,
decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase with
purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed
copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt,1-855-HDHoliday (1-855-434-6543)
Assembly of this product may require more than one person.
PACKAGE CONTENTS
Assembly
1
Assembling the Legs to the Body
Insert the metal connecting rods at the top of each Leg (F, G) into
the matching connecting holes on the underside of the Body (D).
G
3
Assembling the Head / Neck to the Body
Insert the connecting rods on the bottom of the Head / Neck (C)
into the matching connecting holes on the top edge of the Body (D)
and fasten together at the connecting loops with the Plastic Ties (K).
D
Use and Care Guide
5 ft Polar Wishes LED Deer
A
I
E
J
D
K
G
L
D
F
C
K
B
C
H
F
2
Securing the Legs to the Body
Fasten the Legs and Body together at the adjacent metal wire
frame with Plastic Ties (K). The Legs come with metal bars
attached to stabilize the Deer. Insert the hooked end of the
metal bars into the metal nut on the opposite Leg.
4
Assembling the Antlers to the Body
Insert the connecting rods on both Antlers (A) into the matching
connecting holes at the top of Head (C).
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item # 1011113041
Model # 24RT17824181
TOOLS REQUIRED
Part Description
A Antler
B Ear
C Head / Neck
D Body
E Tail
F Front Leg
G Hind Leg
H Bow Tie
I Spare Fuse
J Spare Bulb
K Plastic Tie
L Ground Stake
K
A
C
Plier
Quantity
2
2
1
1
1
2
2
1
2
3
15
4
HOMEDEPOT.COM