Home Accents Holiday 24RT17924181 Use And Care Manual

Safety Information
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 7.2 Watts (0.06 Amps). Do not overload. Do not connect to another lighting string,
decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase with
purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed
copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt,1-855-HDHoliday (1-855-434-6543)
Assembly of this product may require more than one person.
PACKAGE CONTENTS
G
F
H
Assembly
1
Assembling the Lower Gown
Align the two halves of the Lower Gown (E) with each other then
insert the connecting rods on one half into the connecting holes
on the other half and fasten at the adjacent metal wire frames with
Plastic Ties (K).
E
3
Assembling the Halo and Hair to the Head
Insert the connecting rod on the Hair (B) into the connecting hole
on the top of the Head (C). Attach the connecting rod on the Halo
(A) to the connecting hole on the top of the Hair (B) and fasten at
the connecting loops of Hair and Hind neck with Plastic Tie (K).
Use and Care Guide
6 ft Polar Wishes LED Angel
A
C
B
F
D
E
M
K
Part
I
A
B
C
D
J
E
F
G
H
K
I
J
K
L
L
M
2
Assembling the Head to Body / Upper Gown and
assembling the Body / Upper Gown to Lower Gown
Insert the connecting rods on the bottom of the Head (C) into
the connecting holes on the top of the Body / Upper Gown (D).
Insert the connecting rods on the bottom of the Body / Upper
Gown into the connecting holes on the top of the Lower Gown
(E) and fasten at the connecting loops with Plastic Ties (K).
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item # 1011140638
Model # 24RT17924181
TOOLS REQUIRED
Plier
Description
Halo
Hair
Head
Body / Upper Gown
Lower Halves of Gown
Arm / Hand
Wing
Bow Sash
Spare Fuse
Spare Bulb
Plastic Tie
Ground Stake
Anchoring String
C
D
E
K
A
B
C
K
HOMEDEPOT.COM
Quantity
1
1
1
1
2
2
2
1
4
4
15
8
4