Home Accents Holiday 3 ft LED Pelican Use And Care Manual

Safety Information
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 4.8 Watts (0.04 Amps). Do not overload. Do not connect to another lighting string,
decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase with
purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed
copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt,1-855-HDHoliday (1-855-434-6543).
Assembly of this product may require more than one person.
PACKAGE CONTENTS
D
F
Assembly
1
Assembling the Body
Align the two Halves of Body (C) with each other then insert the
connecting rods on one half into the connecting holes on the
other half and fasten at connecting loops with Plastic Ties (J).
3
Assembling the Mouth to the Head and
Assembling the Head to the Body
There are 2 hooks on the back edge of the Mouth (B). Hang the
hooks onto the front edge of the Head (A) and fasten at the
connection loops with Plastic Ties (J). Insert the connection
rods on the bottom of the Head (A) into the connection holes on
the top of the Body (C) and fasten at the connection loops with
Plastic Ties (J).
Use and Care Guide
3 ft LED Pelican
A
B
C
E
C
J
C
H
G
I
J
K
2
Assembling the Legs and Tail to the Body
Insert the connecting rods at the top of each Leg (E) into the
connecting holes at the bottom of the Body (C) and fasten at
the connecting loops with Plastic Ties (J). Insert the connecting
rod of the Tail (F) into the connection hole at the rear of the
Body (C) and fasten at the connecting loops with Plastic Tie (J).
J
F
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item # 1011113038
Model # 24RT2632414
TOOLS REQUIRED
Part Description
A Hat & Head
B Mouth
C Halves of Body
D Wing
E Leg
F Tail
G Gift Box
H Spare Fuse
I Spare Bulb
J Plastic Tie
K Ground Stake
C
E
A
C
Plier
Quantity
1
1
2
2
2
1
1
2
2
15
4
J
B
J
HOMEDEPOT.COM