Safety Information
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 9.6 Watts (0.08 Amps). Do not overload. Do not connect to another
lighting string, decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or
return to place of purchase with purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the
socket enclosures, loose connections, exposed copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt,1-855-HDHoliday (1-855-434-6543)
Assembly of this product may require more than one person.
PACKAGE CONTENTS
K
O
L
P
M
N
Assembly
1
Assembling the Lower Gown
Align the two halves of the Lower Gown (E) with each other then
insert the connecting rods on one half into the connecting holes
on the other half and fasten at the connecting loops with Plastic
Ties (M).
M
3
Assembling the Upper Gown then securing to Lower Gown
Align the two halves of the Upper Gown (D) with each other then
insert the connecting rods on one half into the connecting holes
on the other half and fasten at the connecting loops with Plastic
Ties (M). Insert the connecting rods on the bottom of the assembled
Upper Gown (D) into the connecting holes on the top of the Lower
Gown (E) and fasten at the connecting loops with Plastic Ties (M).
M
Use and Care Guide
7.5 ft Polar Wishes LED
Angel with Harp
A
B
C
G
F
D
I
H
J
E
E
D
E
Part
G
F
2
Securing the Lower Gown to the Base Stand
Secure the assembled Lower Gown (E) and the Base Stand (J)
together at the connecting loops with the Bolt & Wingnuts (N).
N
4
Assembling the Hair to the Head / Body & Halo to the Hair
Insert the connecting rods on the Hair (B) into the connecting
holes on the top of the Head / Body (C). Attach the connecting
rod on the Halo (A) to the connecting hole on the top of the Hair (B).
A
B
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item # 1011113039
Model # 24RT14924111
TOOLS REQUIRED
Plier
Description
A
Halo
B
Hair
C
Head / Body
D
Upper Halves of Gown
E
Lower Halves of Gown
F
Arm / Hand
G
Wing
H
Harp
I
Bow Sash
J
Base Stand
K
Spare Fuse
L
Spare Bulb
M
Plastic Tie
N
Bolt & Wingnut
O
Anchoring String
P
Ground Stake
E
J
C
Screwdriver
Quantity
1
1
1
2
2
2
2
1
1
1
4
4
20
5
4
8
HOMEDEPOT.COM
Need help?
Do you have a question about the 24RT14924111 and is the answer not in the manual?
Questions and answers