Safety Information
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 7.2 Watts (0.06 Amps). Do not overload. Do not connect to another lighting string,
decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase with
purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed
copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt,1-855-HDHoliday (1-855-434-6543)
Assembly of this product may require more than one person.
PACKAGE CONTENTS
C
G
D
H
A
Assembly
1
Assembling the Second Gift Box to the Bottom Gift Box
Insert the connecting rods on the bottom of the Second Gift Box (B)
into the connecting holes on the top of the Bottom Gift Box (A). The
Top left side of the Bottom Gift Box (A) comes with a metal bar to
stabilize the Gift Box. Insert the hooked end of the metal bar into
the metal connecting hole on the Second Gift Box (B).
3
Assembling the Top Gift Box to the Third Gift Box
Insert the connecting rods on the bottom of the Top Gift Box (D) into
the connecting holes on the top left edge of the Third Gift Box (C).
Secure the connecting rods with the Cotter Pins (K).
Use and Care Guide
5.5 ft Icicle Shimmer TWINKLING
LED Stacked Gift Boxes
F
B
E
B
A
Part
M
A
B
C
L
D
E
F
K
G
H
I
J
J
K
I
L
M
2
Assembling the Third Gift Box to the Second Gift Box
Insert the connecting rods on the bottom right edge of the
Third Gift Box (C) into the connecting holes on the top right
edge of the Second Gift Box (B). The Second Gift Box (B) comes
with a metal bar to stabilize the Gift Box. Insert the hooked end
of the metal bar into the metal connecting hole on the Third
Gift Box (C). Secure the metal bar with the Cotter Pins (K).
C
B
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item # 1011140637
Model # 24RT0562411
TOOLS REQUIRED
Plier
Description
Bottom Gift Box
Second Gift Box
Third Gift Box
Top Gift Box
Bow Tie of Bottom Gift Box
Bow Tie of Second Gift Box
Bow Tie of Third Gift Box
Bow Tie of Top Gift Box
Spare Fuse
Spare Bulb
Cotter Pin
Ground Stake
Plastic Tie
K
D
K
Quantity
1
1
1
1
1
1
1
1
2
6
2
4
10
C
HOMEDEPOT.COM
Need help?
Do you have a question about the 24RT0562411 and is the answer not in the manual?
Questions and answers