Home Accents Holiday 24RT3192414 Use And Care Manual

Safety Information
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 2.8 Watts (0.023 Amps). Do not overload. Do not connect to another lighting string,
decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase with
purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed
copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt,1-855-HDHoliday (1-855-434-6543)
Assembly of this product may require more than one person.
PACKAGE CONTENTS
E
F
N
C
O
D
Assembly
1
Assembling the Gift Box to Lower Support Pole
Guide the Lower Support Pole (K) through the center loop of Gift Box
(H). Insert the connecting rods on the Gift Box (H) into the connecting
holes on Lower Support Pole (K) and fasten at the connection loops
with Plastic Tie (N).
N
3
Assembling the Head & Body to the Gift Box
Place the Metal Frame (G) flat on top of the Gift Box (H). Align the
connection loops with each other. Insert the connecting holes on
the bottom of Head & Body (B) into the connecting rods of metal
round loop of Gift Box (H). Stand the gift box upside down. Fasten
at the connecting loops on Gift Box with Plastic Ties (N).
B
G
Use and Care Guide
3.5 ft Yuletide Lane LED Golden
Retriever in Gift Box
L
M
A
C
B
D
I
H
K
H
N
G
J
H
K
2
Assembling the Upper Support Pole to Lower
Support Pole and the Light String to Upper
Support Pole
Insert the Upper Support Pole (J) into the connecting rod on
the Lower Support Pole (K) and secure with the built in locking
pin. Secure the Light String (M) to metal loop on the Upper
Support Pole with Plastic Tie (N). Run the power plugs through
the metal round loop of Gift Box and down to the ground.
M
4
Assembling the Gift Box to Base Stand
Insert the Lower Support Pole (K) into the short connecting rods
on the Base Stand (I) and secure with the built in locking pin.
Unfold the Gift Box and let it drape downward. Fasten all four
corners at the connection loops of Gift Box and Base Stand with
Plastic Ties (N).
N
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item # 1011140635
Model # 24RT3192414
TOOLS REQUIRED
Part Description
A Hat
B Head & Body
C Ears
D Legs
E Bow Tie
F Gift Box Cover
G Metal Frame
H Gift Box
I Base Stand
J Upper Support Pole
K Lower Support Pole
L Scarf
M Light String
N Plastic Tie
O Ground Stake
N
J
K
K
I
Plier
Quantity
1
1
2
2
1
1
1
1
1
1
1
1
1
15
4
HOMEDEPOT.COM