Home Accents Holiday 24RTY49824231 Use And Care Manual

Safety Information
CAUTION: Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 22.8 Watts (0.19 Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase with purchase receipt if the product has
cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt, 1-855-HDHoliday (1-855-434-6543).
Assembly of this product may require more than one person.
PACKAGE CONTENTS
Assembly
1
Assembling the Upper and Lower
Support Bars
□
Stack the bottom of the Upper Support Bar (H)
into the top of the Lower Support Bar (I) then
secure with the built in locking pin.
3
Assembling the Body of Spider to the Support Bracket
□
Insert the connecting rods on the underside of the Body of Spider (E) into
the matching connecting holes on the top of Support Bracket of Spider
(G). Fasten the Body of Spider (E) and Support Bracket (G) together at
adjacent metal frames with the Plastic Ties (L).
Use and Care Guide
5.5 ft Halloween Classic
LED Spider Silhouette
2
Assembling the Support Bracket of Spider
□
Unfold the Support Bracket of Spider (G) then stand upright with the wider end on the
ground. Insert each hooked end of the assembled Upper and Lower Support Bars (H, I)
into the matching connecting holes at the top and bottom of the Support Bracket of
Spider (G). The Support Bars (H, I) come with a metal stabilizing bar attached at the
middle to help stabilize the Support Bracket of Spider (G). Insert the hooked end of the
metal stabilizing bar into the metal nut on the middle of Support Bracket of Spider (G)
then secure all connecting points with the Cotter Pins (J).
Model #24RTY49824231
TOOLS REQUIRED
Part Description
A First pair of spider legs
B Second pair of spider legs
C Third pair of spider legs
D Forth pair of spider legs
E Body of spider
F Eyes of spider
G Support bracket of spider
H Upper support bar
I Lower support bar
J Cotter Pin
K Ground stake
L Plastic Tie
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item #1010 752 612
Claw hammer
Quantity
1
1
1
1
1
1
1
1
1
5
4
15
HOMEDEPOT.COM