Download Print this page

Electric Cable; Important Action; Care; Control - Dustcontrol DC Tromb Turbo EX Instruction Manual

Hide thumbs Also See for DC Tromb Turbo EX:

Advertisement

WARNING
Protective gloves must be worn when assembling, handling and transporting the product.

Electric cable

WARNING
Never pull the machine by the power cord. Keep the power cord away from heat and sharp
objects. Regularly inspect the power cord.
If using an extension cord, it must be waterproof.
The machine must not be used if the power cords or contacts are damaged.
If the power cord is damaged, it must be replaced by Dustcontrol or a Dustcontrol authorized service center.

Important action

Turn off the main power switch and disconnect the machine from the power supply before cleaning or performing
maintenance on the machine.
This machine may only be used if all filters are undamaged and correctly fitted.

Care

Keep the machine clean and free from dust deposits. Ensure that the suction hose and all seals are intact and
undamaged. Keep the carrying handles dry and free from oil and grease.

Control

Regularly check the device for damage and wear. If damage occurs, these must be repaired by a Dustcontrol
service technician or by a service workshop authorized by Dustcontrol.

ATEX

WARNING
This machine is to be used in zone 22 or outside explosive zones (air/flammable dust) in areas
where explosive atmospheres in the form of combustible dust clouds in the air are unlikely to
occur during normal operation, but if they do occur, only for a short time period.
WARNING
The supplied connector is only intended for connection outside the zone. Standard CEE wall
sockets and grounded Schuko type sockets are not permitted in zone 22. The machine must
therefore be connected to the mains outside zone 22.
DC Tromb Turbo EX
32

Advertisement

loading
Need help?

Need help?

Do you have a question about the DC Tromb Turbo EX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel