Page 1
2900 Original instructions Par t No 9 45 6 6 WARNING! Read the instruction manual before using the machine.
Page 2
Dustcontrol reserves the right to change specifi cations without notice and is under no obligation to alter previously delivered products. Dustcontrol is not responsible for errors or omissions in this user instruc- tion. Manufactured by: Sold by: Dustcontrol AB Boc 3088, Kumla Gårdsväg 14...
Before futher use of the machine it should be – To Reduce the Risk of Electric Shock- Un- carefully checked that the machine is unda- plug Before Cleaning or Servicing” maged. If appliance is not working as it should, Part No 94566 DC 2900 UL, 4 2017-10-09...
Page 5
Do not run appliance over cord. If there are any damaged parts these should be repai- red by a Dustcontrol authorized service center. If the supply cord is damaged, it must be re- placed by the manufacturer, its service agent or similarly qualifi...
0.85 m 0.85 m Degree of separation micro fi lter, 99.995 % 99.995 % (EN 60335-2-69, Klass H) (EN 1822-1) HEPA H13 HEPA H13 Sound level < 68 dB(A) < 68 dB(A) Part No 94566 DC 2900 UL, 6 2017-10-09...
The dust extractor is, despite its compact size, sensitive to noise. The direct drive two stage high a full capacity Dustcontrol machine. It is stable, pressure fan is integrated into the top. The fan is tough, reliable and particularly suited to spot ex- double insulated for higher safety.
During the fi lter change, check the fi lter gasket. A damaged gasket can allow the release of hazar- dous dust. Never use old gaskets or after-market fi lters. Use only genuine Dustcontrol spare parts to maintain the unit for use with hazardous dusts. Change of HEPA fi lter:...
Page 9
Switch ON Switch ON - take out the bag Switch ON - put the new sack on Switch ON - pulse the fi lter and run the dust collector DC 2900 UL, 9 Part No 94566...
Normal wear is not covered by this warranty. Service covers manufacturing faults. The warranty is valid performed by other than Dustcontrol or its authorized only if the machine is used under normal conditions agent automatically voids the warranty. No other for tasks for which it was designed and is maintained warranty or implied is applicable.
Serial Number and manufacturing year are indicated in a rating plate on the machine. Dustcontrol AB Peter Söderling Technical Manager Dustcontrol AB, Box 3088, Kumla Gårdsväg 14, SE-145 03 Norsborg, Tel: + 46 8 531 940 00, support@dustcontrol.se, www.dustcontrol.com DC 2900 UL, 13 Part No 94566...
Need help?
Do you have a question about the DC 2900 UL and is the answer not in the manual?
Questions and answers