Download Print this page

Zycoo TC10 Quick Installation Manual

Download this manual

Ceiling Speaker

TC10

Quick Installation Guide

Need help?

Do you have a question about the TC10 and is the answer not in the manual?

Page 1 Ceiling Speaker TC10 Quick Installation Guide...
Page 2: Product Information
Product Information Grille Tweeter Woofer Spring Clip 80mm 190mm...
Page 3 163mm Back cover...
Page 4: Installation
105mm 190mm Installation Please mark the size of the ceiling mounting hole ﬁrst and cut a hole in the ceiling as marked (Figure 1). The diameter of the hole should be between 168 and 172 mm. Ceiling Figure 1...
Page 5 Connect the audio wires to the terminals (Connect the COM port and the voltage/resistance port according to the label on the terminal). Constant Voltage Output 70V 5W / 100V 10W Impedance Output 8Ω 10W Push the spring clips on both sides of the speaker upward to prepare for mounting. For safety, it is recommended to wear gloves during this step.
Page 6 Carefully push the speaker into the mounting hole. Gradually release the spring clips, ensuring the speaker is securely embedded in the ceiling. Figure 2 Finally, check to ensure the speaker is securely installed and stable. Figure 3...