Chapter 3 Product Introduction; Intended User; Product Overview - INVT XD7KTL User Manual

Single-phase Hybrid Solar Inverter
11. If the battery has been completely discharged, please strictly follow the User Manual of the battery to charge the battery.
12. For system maintenance service, please contact our local authorized service personnel or our after-sales personnel.
13. The hybrid inverter system should be connected to the power grid only after getting permission.
14. Turn off the PV switch before installing a solar PV panel during the sunny daytime, or there could be a serious risk of electric
shock.
15. Do not connect a PV string to more than one inverter, as this could cause damage to the inverters.
16. Do not connect a device that relies on continuous and stable power supply (such as a life-sustaining medical device), to the
emergency power supply (EPS) port.

Chapter 3 Product Introduction

3.1 Intended User

The hybrid inverter in XD series should be installed only by trained professionals who are familiar with local regulations, standards
and electrical systems and have a good knowledge of this product.
It is highly recommended that the installer read this Manual carefully, so as to learn about product installation, troubleshooting
and communication networking.

3.2 Product Overview

The inverter in XD series is intended to store the energy generated in the PV system or provided by the public power grid into the
battery, and also output energy to the power grid. In the case of electric power failure, the hybrid inverter can provide energy to the
load as a backup power supply.
This Manual applies to the following hybrid inverter models:
XD7KTL\XD8KTL\XD10KTL
Overview:
3
Product Introduction