Admonition Messages And Symbols - HMS Networks Intesis 700 Series User Manual

700series Air Gateway - IN775FGL⁎⁎⁎O000
This Intesis gateway is designed for installation in an enclosure. When the device is mounted outside an
enclosure, precautions should be taken to avoid electrostatic discharges to the unit in environments with static
levels above 4 kV. When working in an enclosure (e.g., making adjustments, setting switches, etc.), typical
anti-static precautions should be observed before touching the unit.
Binary inputs, if present, are potential-free contact. Do not connect any voltage.
These safety instructions in other languages can be found here.

3.3. Admonition Messages and Symbols

CAUTION
Instruction that must be followed to avoid a potentially hazardous situation that, if not avoided,
could result in minor or moderate injury.
IMPORTANT
Instruction that must be followed to avoid a risk of reduced functionality and/or damage to the
equipment or to avoid a network security risk.
NOTE
Additional information which may facilitate installation and/or operation.
TIP
Helpful advice and suggestions.
NOTICE
Remarkable Information.
Page 4 of 43
Admonition Messages and Symbols
USER MANUAL Version 1.0.11