Download Print this page

Cleaning And Maintenance; Technical Specifications; Troubleshooting - cecotec PROCLEAN 5010 INVERTER Instruction Manual

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 27
ENGLISH
Deactivating the ECO mode:
1.
Press the
button twice (do not allow more than one second between presses).
2. The display will show "OFF" and the microwave will enter standby mode.

5. CLEANING AND MAINTENANCE

Be sure to unplug the appliance from the mains.
1.
After using it, wipe the inside of the microwave with a slightly damp cloth.
2. Wash the accessories with soap and water.
3. The frame, door seal and adjacent parts should be carefully cleaned with a damp cloth
when dirty.
4. Do not use abrasive cleaners or sharp metal scrapers to clean the glass on the door, as
they may scratch the surface, which could cause the glass to break.
5. Cleaning Tip---For easy cleaning of the inside walls of the microwave oven: Put half a
lemon in a bowl, add 300 ml of water and heat at 100% power in the microwave for 10
minutes. Clean the appliance with a soft and dry cloth.

6. TROUBLESHOOTING

Normal
Radio and television signals may be interfered with
Microwave interferes with TV
when the microwave is in operation. The same applies
signal
to other small appliances such as blenders, vacuum
cleaners, and electric fans.
This is normal.
Microwave light is dim
If you select a low power setting, the microwave light
will dim. This is normal.
Steam builds up in the door
During cooking, steam comes out from food. Most of
and hot air escapes from the
it will come out through the ventilation grilles. But it
ventilation grilles
can accumulate in cold places such as the door. This is
normal.
The microwave has been started
It is not permitted to use the microwave without food
without food in it
inside. It is very dangerous.
60
PROCLEAN 5010 INVERTER/PROCLEAN 5010 INVERTER WHITE
Problem
Cause
(1) The power cable
is not plugged in
correctly.
The appliance
(2) Fuse blown or
does not switch
faulty residual current
on
circuit breaker.
(3) Problem with the
socket.
The appliance
(4) The door is not
does not heat up
properly closed.

7. TECHNICAL SPECIFICATIONS

Product reference: 01339/ A01_EU01_100005
Product: Proclean 5010 Inverter/ Proclean 5010 Inverter White microwave
Voltage: 230 - 240 V ~
Frequency: 50 Hz; 2450 MHz (microwave)
Rated power: 1020 W; 700 W (microwave)
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product
and/or batteries must be disposed of separately from household waste.
When this product reaches the end of its shelf life, you should dispose of the
cells/batteries/accumulators and take them to a collection point designated
by the local authorities. 
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
PROCLEAN 5010 INVERTER/PROCLEAN 5010 INVERTER WHITE
ENGLISH
Solution
Unplug the appliance and plug it in again
after 10 seconds.
Replace the fuse or reset the circuit breaker.
If you need help, please contact the official
Cecotec Technical Support Service.
Test the plug with another electrical
appliance.
Close the door correctly.
61

Advertisement

loading
Need help?

Need help?

Do you have a question about the PROCLEAN 5010 INVERTER and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Proclean 5010 inverter white