Frigidaire Gallery Premier FGES3075K Installation Instructions Manual page 2

30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
NOTES:
1. Do not pinch the power supply cord or the
flexible gas conduit between the range and
the wall.
2. Do not seal the range to the side cabinets.
3. 24" (61 cm) minimum clearance between
the cooktop and the bottom of the cabinet
when the bottom of wood or metal cabinet
is protected by not less than ¼" (0,64 cm)
flame retardant millboard covered
with not less than No. 28 MSG sheet
metal, 0,015"(0,4 mm) stainless steel,
0,024"(0,6 mm) aluminum, or 0,020"
(0,5 mm) copper.
30" (76,2 cm) minimum clearance
when the cabinet is unprotected.
4. For cutouts below 22 7/8"(58,1 cm),
appliance will slightly show out of the
cabinet.
5. Allow at least 19 ¼" (48,9 cm)
clearance for door depth when it is
open.
*** IMPORTANT:
than 30 1/16" (76,4 cm), make sure the appliance is centered in the counter opening while
pushing into it. Raise leveling legs at a higher position than the cabinet height (see page
3), insert the appliance in the counter and then level.
by the leveling legs and NOT by the cooktop itself.
IMPORTANT:
Cabinet and countertop
width should match the cutout width.
A. HEIGHT B. WIDTH
(Under Cooktop)
35 7/8" (91,1 cm) - 30" (76,2 cm)
36 5/8" (93 cm)
Door Open
(see note 5)
To avoid cooktop breakage for cutout width (E dimension) of more
E
E
C. COOKTOP D. TOTAL DEPTH TO
WIDTH FRONT OF RANGE
31 5/16" 28 5/16" (71,9 cm)
(79.5 cm)
21¾"
(55.25 cm)
B
Make sure the unit is supported
22 7/8"(58,1 cm) min.
23 1/4"(59,05 cm) max.
FRONT OF
CABINET
E. CUTOUT WIDTH***
(Countertop
and cabinet)
30±1/16" 21 3/4" (55,2 cm) Min.
(76,2±0,15 cm) 22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
2
C
A
D
Side Panel
(see Note 4)
1 1/8"
(2,86 cm)
F
Ref.
F. CUTOUT G. HEIGHT
DEPTH OF COUNTERTOP
35 7/8" (91,1 cm) Min.
36 5/8" (93 cm) Max.
backguard