Front Of The Switch; Network Ports; Reset Button - HP J4897A Installation Manual

Introducing the HP Procurve Series 2700 Switches

Front of the Switch

Front of the Switch
Power Fault
LED LED
Mbps
Mbps
Mbps
Mode LED View button

Reset button

and indicator LEDs
Mbps
Mbps
Mbps

Network Ports

8 auto-sensing 10/100/1000Base-T RJ-45 ports
All these ports have the IEEE 802.3ab "Auto MDI/MDI-X" feature, which
means that you can use either straight-through or crossover twisted-pair
cables to connect any network devices to the switch.
Reset Button
This button is used to reset the switch while it is powered on. This action
executes the switch self test.
1-2
10/100/1000Base-T RJ-45 ports
Link and Mode LEDs
for each port
10/100/1000Base-T RJ-45 ports
All 10/100/1000Base-T RJ-45 ports have the
IEEE 802.3ab "Auto MDI/MDI-X" feature