Installing The Series 2700 Switches; Included Parts - HP J4897A Installation Manual

Installing the Series 2700 Switches

The HP Series 2700 Switches are easy to install. They come with an accessory
kit that includes the brackets for mounting the switch in a standard 19-inch
telco rack or an equipment cabinet, or on a wall, and with rubber feet that can
be attached so the switch can be securely located on a horizontal surface. The
brackets are designed to allow mounting the switch in a variety of orientations.
This chapter shows you how to install your Series 2700 Switches.

Included Parts

The Series 2700 Switches are shipped with the following components:
■
■
■
■
HP Procurve Series 2700 Switches Installation Guide (5990-3055), this
manual
Customer Support/Warranty booklet
Accessory kit (5064-2085)
• two mounting brackets
• four 8 mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
• four rubber feet
Power cord, one of the following:
Australia/New Zealand
China
Continental Europe
Denmark
Japan
Switzerland
United Kingdom/Hong Kong/Singapore
United States/Canada/Mexico
8120-6803
8120-8377
8120-6802
8120-6806
8120-6804
8120-6807
8120-8709
8120-6805
2
2-1