Virtual Server; Nat-Virtual Servers Setup - D-Link DSL-2540B - ADSL2/2+ Modem With EN Router User Manual

Section 7 - Advanced Setup

Virtual Server

If you enable NAT (Network Address Translation), you can configure the Virtual Server, Port Triggering, and DMZ Host.
NAT—Virtual Servers Setup
A virtual server allows you to direct incoming traffic from the WAN side to a specific IP address on the LAN side. This
is useful if you have software that requires communication with the Internet (e.g. peer-to-peer, games, etc.).
This figure shows the Virtual Servers
Setup page that allows you to configure
your virtual server(s). Click on the Add
button to configure a virtual server.
D-Link DSL-540B ADSL+ 4-Port Router User Manual 33