D-Link DSL-2540B - ADSL2/2+ Modem With EN Router User Manual page 49

Section 8 - Tools
To configure the system log, click the Configure
System Log button.
From the configuration screen, set the log to
Enable, select the Log Level, Display Level and
Mode. If the selected mode is "Remote" or "Both",
events will be sent to a specified IP address and
UDP port of a remote system log server. If the
selected mode is "Local" or "Both", events will be
recorded and viewed locally. Select the desired
values and click Apply to save the system log
options.
D-Link DSL-540B ADSL+ 4-Port Router User Manual 49