Sample Configuration
This chapter collects the results of the Ethernet WAN interface, DHCP, VLAN, Easy VPN, and wireless
interface configurations made in previous chapters. This allows you to view what a basic configuration
provided by this guide looks like in a single sample,
Note
Commands marked by "(default)" are generated automatically when you run the show running-config
command.
Example 10-1 Sample Configuration
Router# show running-config
Building configuration...
Current configuration : 3781 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname retail
!
boot-start-marker
boot-end-marker
!
enable password cisco123
!
username jsomeone password 0 cg6#107X
aaa new-model
!
aaa group server radius rad_eap
server 10.0.1.1 auth-port 1812 acct-port 1813
!
aaa authentication login eap_methods group rad_eap
aaa session-id common
ip subnet-zero
ip cef
!
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
!
OL-5332-01
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
C H A P T E R
Example
10-1.
10
10-1