Tftp Download Command Variables; Required Variables - Cisco CISCO851-K9 - 851 Integrated Services Router Configuration Manual

Disaster Recovery with TFTP Download

TFTP Download Command Variables

This section describes the system variables that can be set in ROM monitor mode and that are used
during the TFTP download process. There are both required variables and optional variables.
Note The commands described in this section are case sensitive and must be entered exactly as shown.

Required Variables

These variables must be set with these commands before you use the tftpdnld command:
Variable
IP address of the router.
Subnet mask of the router.
IP address of the default gateway of the
router.
IP address of the TFTP server from which the
software will be downloaded.
Name of the file that will be downloaded to
the router.
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
C-4
Command
IP_ADDRESS= ip_address
IP_SUBNET_MASK=
ip_address
DEFAULT_GATEWAY=
ip_address
TFTP_SERVER= ip_address
TFTP_FILE= filename
Appendix C ROM Monitor
OL-5332-01