Parkside PBSS 15 A1 Manual

DRILL AND TAP DRILL SET /// PBSS 15 A1
DRILL AND TAP DRILL SET
BOR- OG GEVINDBORSSÆT
SET DE FORETS ET TARAUDS
BOREN- EN DRAADBORENSET
BOHRER- UND GEWINDEBOHRER-SET
IAN 282448
Hardness: max. HRC20 /
max. RPM
Materialets hårdhedsgrad: maks. HRC20 /
Dureté du matériel: max. HRC20 /
Ø 2.5 3100
Materiaalhardheid: maximaal HRC20 /
Materialhärte: max. HRC20
Ø 3.3 2400
Ø 4.2 1900
Ø 5 1500
Ø 6.8 1170
Ø 8.5 930
Ø 10.2 750
DRILL AND TAP DRILL SET
WARNING!
PLEASE READ THE INSTRUCTIONS BEFORE USE!
PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE!
THIS IS NOT A TOY!
KEEP OUT OF THE REACH OF CHILDREN.
Introduction
We congratulate you on the purchase of your new product. You have chosen a
high quality product. Familiarise yourself with the product before using it for the first
time. In addition, please carefully refer to the operating instructions and the safety
advice below. Only use the product as instructed and only for the indicated field of
application. Keep these instructions in a safe place. If you pass the product on to
anyone else, please ensure that you also pass on all the documentation with it.
Use
• Place the mounted tap on the core hole. Ensure that the tap is absolutely
perpendicular.
• Turn the tap wrench slowly clockwise using even pressure.
• If necessary turn it backwards slightly to break up the accumulated metal
shavings.
Disposing of the article
The article should be disposed of via an authorized waste disposal company or your
local waste disposal organization.
The valid regulations must be complied with. If in doubt, contact your waste disposal
organization.
BOR- OG GEVINDBORSSÆT
BEMÆRK!
LÆS BRUGSVEJLEDNINGEN GRUNDIGT FØR BRUG
OPBEVAR BRUGSVEJLEDNINGEN OMHYGGELIGT!
DET ER IKKE LEGETØJ!
OPBEVARES UTILGÆNGELIGT FOR BØRN.
Indledning
Hjerteligt tillykke med købet af deres nye produkt. Du har besluttet dig for et produkt
af høj kvalitet. Gør Dem fortrolig med apparatet inden første ibrugtagning. Læs
derfor den efterfølgende brugsvejledning og sikkerhedsanvisningerne omhyggeligt.
Brug kun produktet som beskrevet og kun til de angivne anvendelsesområder.