Advantech AIMB-508 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. AIMB-508
  6. User manual

Advantech AIMB-508 User Manual

12th/13th gen intel core i9/i7/i5/i3 processors (lga1700), micro atx with dp/hdmi/vga/ edp (lvds), 1 x gbe lan, 1 x 2.5gbe lan, 8 x usb 3.2, 2 x pci slot, 10 x com
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
AIMB-508
®
12th/13th Gen Intel
Core™ i9/i7/
i5/i3 Processors (LGA1700),
Micro ATX with DP/HDMI/VGA/
eDP (LVDS), 1 x GbE LAN,
1 x 2.5GbE LAN, 8 x USB 3.2,
2 x PCI slot, 10 x COM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIMB-508 and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech AIMB-508

Summary of Contents for Advantech AIMB-508

  • Page 1 User Manual AIMB-508 ® 12th/13th Gen Intel Core™ i9/i7/ i5/i3 Processors (LGA1700), Micro ATX with DP/HDMI/VGA/ eDP (LVDS), 1 x GbE LAN, 1 x 2.5GbE LAN, 8 x USB 3.2, 2 x PCI slot, 10 x COM...

  • Page 2: Product Warranty (2 Years)

    No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.

  • Page 3: Declaration Of Conformity

    12 MB i3-12100TE Alder Lake 4P+0E 4.0GHz 12 MB G7400E Alder Lake 2P+0E 3.6GHz 6 MB G7400TE Alder Lake 2P+0E 3.0GHz 6 MB G6900E Alder Lake 2P+0E 3.0GHz 4 MB G6900TE Alder Lake 2P+0E 2.4GHz 4 MB AIMB-508 User Manual...

  • Page 4: Ordering Information

    It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the AIMB-508, check it for signs of ship- ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our service department or your local sales representative immediately.

  • Page 5: Table Of Contents

    Figure 1.1 Jumper and Connector Locations....... 4 Table 1.1: Jumper Setting List............. 5 Table 1.2: Connector/Header List..........5 Figure 1.2 AIMB-508 Rear I/O ............ 6 Figure 1.3 AIMB-508HF Rear I/O ..........6 Figure 1.4 AIMB-508HL Rear I/O ..........6 AIMB-508 Board Diagram ................. 7 Figure 1.5 AIMB-508 Block Diagram ...........
  • Page 6 Boot Setting ................105 3.2.6 Save & Exit Configuration............106 3.2.7 MEBx ..................107 Chapter Software Introduction & Service ... 109 Introduction ................... 110 Value-Added Software Services ............110 4.2.1 Software API................110 4.2.2 Software Utility................112 AIMB-508 User Manual...
  • Page 7 Table A.22:Alarm Board / CMM Power Connector (VOLT1) ..130 A.19 ATX/AT Mode Selection (PSON1) ............131 Table A.23:................131 Table A.24:................131 A.20 Intel® ME Header (JME1) ..............131 Table A.25:Intel® ME Header (JME1) ........131 A.21 COMS Mode (JCMOS1) ............... 132 Table A.26:................132 AIMB-508 User Manual...
  • Page 8 LED Port 80 Connector (LED_P80) ............143 Table A.52:LED Port 80 Connector (LED_P80) ....... 143 A.45 CPU FAN Connector (CPUFAN1) ............144 Table A.53:CPU FAN Connector (CPUFAN1)......144 A.46 M.2 M-Key Connector (M2M1).............. 144 Table A.54:M.2 M-Key Connector (M2M1) ....... 144 AIMB-508 User Manual viii...
  • Page 9 ATX 8-Pin Main Power Connector (ATX12V1) ........145 Table A.55:ATX 8-Pin Main Power Connector (ATX12V1)..145 A.48 VGA1 Force on Pin Header (JFV1)............146 Table A.56:VGA1 Force on Pin Header (JFV1) ......146 A.49 COM1 Connector (COM1) ..............146 Table A.57:COM1 Connector (COM1)........146 AIMB-508 User Manual...
  • Page 10 AIMB-508 User Manual...

  • Page 11: Chapter 1 General Information

    Chapter General Information...

  • Page 12: Introduction

    Introduction AIMB-508 is designed with the Intel® H610E chipset for industrial applications that require both performance computing and enhanced power management capabilities. The motherboard supports an Intel® Core™ i9/i7/i5/i3 processor with up to 36MB L3 cache and DDR4 3200MHz up to 64GB (up to 32GB per slot). It is equipped with abundant I/O connectivity with 10 x serial ports, 6 x USB 2.0, 8 x USB 3.2 Gen2, 1 x...

  • Page 13: Graphics

    2.5 A Measure the maximum current value with the system under maximum load ® (CPU: 13th Gen Intel Core™ i9-13900E 1.80GHz, RAM: ADVANTECH 32GB 2Rx8 DDR4 3200 *2PCS with full loading) Input mode: ATX input  Board size: 244 mm x 244 mm (9.6" x 9.6") ...

  • Page 14: Jumpers And Connectors

    Jumpers and Connectors Connectors on the AIMB-508 motherboard link it to devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and connectors. Later sections in this chapter give instructions on setting jumpers.

  • Page 15: D-Sub Connector (Vga1)

    IC / Internal Buzzer / External Speaker header Universal Serial Bus 3.0 Port 11/12 USB1112 Universal Serial Bus 3.0 Port 13/14 USB1314 SPI BIOS flash socket1 SPI1 SPI TPM Module connector (for optional TPM module) SPI_TPM1 AIMB-508 User Manual...
  • Page 16 System fan #2 connector SYSFAN2 System fan #1 connector SYSFAN1 Extended power button pin header JFP3 Extended power LED pin header JFP4 Figure 1.2 AIMB-508 Rear I/O Figure 1.3 AIMB-508HF Rear I/O Figure 1.4 AIMB-508HL Rear I/O AIMB-508 User Manual...

  • Page 17: Aimb-508 Board Diagram

    AIMB-508 Board Diagram Figure 1.5 AIMB-508 Block Diagram Safety Precautions Warning! Always completely disconnect the power cord from the chassis when- ever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sud- den power surges.

  • Page 18: Jumper Settings

    Disable Flash Descriptor Security (Default) Enable Security measures defined in the Flash Descriptor. 1.8.3 CMOS Clear Jumper (JCMOS1) Table 1.4: Signal Pin Definition VBAT RTC RESET# Table 1.5: Function Jumper Setting Keep COMS Data (Default) Clear CMOS Data AIMB-508 User Manual...

  • Page 19: Com3_Ri# Pin Ri#/5V/12V Selection (Jsetcom3_V1)

    Set COM3_RI# as 12V 1.8.5 Watchdog Timer Output and OBS Beep (JOBS1+JWDT1) Table 1.7: Watchdog Timer Output and OBS Beep (JOBS1+JWDT1) Function Setting Watchdog Timer Output (2-3) (Default) OBS BEEP (4-5) (Default) Watchdog Timer Disable (1-2) OBS BEEP (4-5) (Default) AIMB-508 User Manual...

  • Page 20: Power Switch / Hdd Led / Smbus / Speaker Pin Header (Jfp1)

    Power Button- SPK_P3 SMB_DATA System Reset+ SPK_P4 SMB_CLK System Reset- Table 1.9: Function Jumper Setting Internal Buzzer (Default) 1.8.7 ATX/AT Mode Selection (PSON1) Table 1.10: Function Jumper Setting ATX Mode (Default) AT Mode Table 1.11: Signal +VCC AIMB-508 User Manual...

  • Page 21: Edp Panel / Lvds Panel Voltage Selection (Jlvds1)

    Signal Pin Definition +12V +3.3V Table 1.13: Function Jumper Setting Jumper position for +3.3V (Default) System Memory AIMB-508 has four 288-pin DDR4 memory sockets for 3200MHz memory modules with maximum capacity of 64GB (Maximum 32GB for each DIMM). AIMB-508 User Manual...
  • Page 22 AIMB-508 User Manual...

  • Page 23: Chapter 2 Connecting Peripherals

    Chapter Connecting Peripherals...

  • Page 24: Introduction

    USB Ports (LAN1_USB12/LAN2_USB34/ USB5678/USB910/USB1112/USB1314) The AIMB-508 provides up to 14 USB ports (4 x USB 3.2 Gen1, 4 x USB 2.0 on the rear side, 4 x USB 3.2 Gen1 via internal header and 2 x USB 2.0 via vertical connec- tor).

  • Page 25: Displayport + Hdmi Connector (Dp1+Hdmi1)

    DisplayPort + HDMI Connector (DP1+HDMI1) DP connector has max resolution support of 4096 x 2304 @ 60 Hz. HDMI connector has max resolution support of 4096 x 2160 @ 30 Hz. AIMB-508 User Manual...

  • Page 26: Serial Ports (Com1/Com2/Com3456/Com78910)

    Serial Ports (COM1/COM2/COM3456/COM78910) AIMB-508 supports six serial ports. COM1 supports RS-232/422/485 and COM2-10 supports RS-232. These ports can connect to serial devices, such as a mouse or a printer, or to a com- munications network. AIMB-508 User Manual...

  • Page 27: Cpu Fan Connector (Cpufan1)

    CPU Fan Connector (CPUFAN1) AIMB-508 User Manual...

  • Page 28: System Fan Connector (Sysfan1/Sysfan2/Sysfan3/Sysfan4)

    System FAN Connector (SYSFAN1/SYSFAN2/ SYSFAN3/SYSFAN4) If a fan is used, this connector supports cooling fans at 1500 mA (18 W) or less. AIMB-508 User Manual...

  • Page 29: Power Led Pin Header (Jfp2)

    Power LED Pin Header (JFP2) AIMB-508 User Manual...

  • Page 30: Audio Jack (Audio1)

    Audio Jack (AUDIO1) AIMB-508 User Manual...

  • Page 31: Serial Ata Interface Connector (Sata1~4)

    Serial ATA Interface Connector (SATA1~4) AIMB-508 features a high performance Serial ATA III interface (up to 600 MB/s) which eases hard drive cabling with thin, space-saving cables. AIMB-508 User Manual...

  • Page 32: Front Panel Audio Connector (Fpaud1)

    2.10 Front Panel Audio Connector (FPAUD1) AIMB-508 User Manual...

  • Page 33: Pci Express X16 Slot (Pciex16_1) Pci Express X1 Slot (Pciex1_1)

    2.11 PCI Express x16 Slot (PCIEX16_1) PCI Express x1 Slot (PCIEX1_1) AIMB-508 User Manual...

  • Page 34: Pci Slot (Pci1/Pci2)

    2.12 PCI Slot (PCI1/PCI2)   AIMB-508 User Manual...

  • Page 35: Ngff M.2 M-Key Connector For 2280 Module (M2M1)

    2.13 NGFF M.2 M-Key Connector for 2280 Module (M2M1) M.2 M-key: 2280, PCIe x2 interface with support for NVMe devices. AIMB-508 User Manual...

  • Page 36: General Purpose I/O Connector (Gpio1)

    2.14 General Purpose I/O Connector (GPIO1) AIMB-508 User Manual...

  • Page 37: Case Open Connector (Jcase1)

    2.15 Case Open Connector (JCASE1) AIMB-508 User Manual...

  • Page 38: Atx Power Connector (Eatxpwr1, Atx12V1)

    1. Please connect the ATX12V1 connector with the PSU ATX 12V 8-pin connector. 2. For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 180 W. AIMB-508 User Manual...

  • Page 39: Ddr4 U-Dimm Socket (Dimma1/Dimmb1)

    2.17 DDR4 U-DIMM Socket (DIMMA1/DIMMB1) AIMB-508 User Manual...

  • Page 40: Spdif Interface Connector (Spdif1)

    2.18 SPDIF Interface Connector (SPDIF1)   AIMB-508 User Manual...

  • Page 41: Battery Wafer Box (Bat1)

    2.19 Battery Wafer Box (BAT1) AIMB-508 User Manual...

  • Page 42: Spi Bios Flash Socket (Spi1)

    2.20 SPI BIOS Flash Socket (SPI1)   AIMB-508 User Manual...

  • Page 43: Edp Backlight Inverter Power Connector (Inv1)

    2.21 eDP Backlight Inverter Power Connector (INV1) AIMB-508 User Manual...

  • Page 44: Smbus Connector (Smbus1)

    2.22 SMBUS Connector (SMBUS1)   AIMB-508 User Manual...
  • Page 45 2.23 -V5/+V5/-V12/+V12/+V3.3/+V5_DUAL Power Supply Connector (VOLT1) AIMB-508 User Manual...

  • Page 46: Edp Connector / Lvds Connector (Edp1_Lvds1)

    2.24 eDP Connector / LVDS Connector (EDP1_LVDS1)   AIMB-508 User Manual...

  • Page 47: Audio Amplifier Output Pin Header (Amp1)

    2.25 Audio Amplifier Output Pin Header (AMP1) AIMB-508 User Manual...

  • Page 48: Lvds Vesa, Jeida Format Selection Pin Header (Jlvds_Vcon1)

    2.26 LVDS VESA, JEIDA Format Selection Pin Header (JLVDS_VCON1)   AIMB-508 User Manual...

  • Page 49: Edp Panel / Lvds Panel Voltage Selection (Jlvds1)

    2.27 EDP Panel / LVDS Panel Voltage Selection (JLVDS1) AIMB-508 User Manual...

  • Page 50: At/Atx Mode Selection (Pson1)

    2.28 AT/ATX Mode Selection (PSON1)   AIMB-508 User Manual...

  • Page 51: Intel® Me Header (Jme1)

    2.29 Intel® ME Header (JME1) AIMB-508 User Manual...

  • Page 52: Cmos Clear Jumper (Jcmos1)

    2.30 CMOS Clear Jumper (JCMOS1)   AIMB-508 User Manual...

  • Page 53: Watchdog Timer Output And Obs Beep (Jwdt1+Jobs1)

    2.31 Watchdog Timer Output and OBS Beep (JWDT1+JOBS1) AIMB-508 User Manual...

  • Page 54: Pwrbtn# / Reset# / Hdd Led / Serial Bus From Hw Monitor Ic / Internal Buzzer / External Speaker Header (Jfp1)

    2.32 PWRBTN# / RESET# / HDD LED / Serial Bus from HW Monitor IC / Internal Buzzer / External Speaker Header (JFP1)   AIMB-508 User Manual...

  • Page 55: Spi Tpm Module Connector (Spi_Tpm1)

    2.33 SPI TPM Module Connector (SPI_TPM1) AIMB-508 User Manual...

  • Page 56: Spi Pin Header (Spi1_Cn1)

    2.34 SPI Pin Header (SPI1_CN1)   AIMB-508 User Manual...

  • Page 57: Case Open Connector (Jcase1)

    2.35 Case Open Connector (JCASE1) AIMB-508 User Manual...

  • Page 58: Com3 Ri# Selection Pin Header (Jsetcom3_V1)

    2.36 COM3 RI# Selection Pin Header (JSETCOM3_V1)   AIMB-508 User Manual...

  • Page 59: Led Port 80 Connector (Led_P80)

    2.37 LED Port 80 Connector (LED_P80) AIMB-508 User Manual...

  • Page 60: Vga1 Force On Pin Header (Jfv1)

    2.38 VGA1 Force on Pin Header (JFV1) AIMB-508 User Manual...

  • Page 61: Bios Operation

    Chapter BIOS Operation...

  • Page 62: Introduction

    AIMB-508 setup screens. BIOS Setup The AIMB-508 Series system has AMI BIOS built in, with a setup utility that allows users to configure required settings or to activate certain system features. The setup saves the configuration in the flash memory of the motherboard. When the power is turned off, the battery on the board supplies the necessary power to pre- serve the flash memory.

  • Page 63: Main Menu

    System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> or <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. AIMB-508 User Manual...

  • Page 64: Advanced Bios Features

    3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-508 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration and go to the sub-menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 65 3.2.2.1 CPU Configuration Performance-core Information  Displays the P-core information. AIMB-508 User Manual...
  • Page 66 3.2.2.2 CPU SMM Enhancement SMM Use Delay Indication [Enable]  Enable/disable usage of SMM_DELAYED MSR for MP sync in SMI. SMM Use Block Indication [Enable]  SMM Use SMM en-US Indication [Enable]  AIMB-508 User Manual...
  • Page 67 3.2.2.3 Power & Performance CPU – Power Management Control  CPU – Power Management Control Options. GT – Power Management Control  AIMB-508 User Manual...
  • Page 68 3.2.2.3.1 CPU – Power Management Control Boot performance mode [Turbo Performance]  Select the performance state that the BIOS will set starting from reset vector. AIMB-508 User Manual...
  • Page 69 View/Configure Turbo Ratio Limit Options. – Energy Efficient P-state [Enable] – Package Power Limit MSR Lock [Disabled] – Power Limit 1 Override [Disabled] – Power Limit 2 Override [Enabled] – Power Limit 2 0 – Energy Efficient P-state [Enabled] AIMB-508 User Manual...
  • Page 70  – E-core Turbo Ratio Limit Numcore0 1 Efficient-core Turbo Ratio Limit Numcore0 defines the core range, the turbo ratio is defined in E-core Turbo Ratio Limit Ratio0. If the value is zero, this entry is ignored. AIMB-508 User Manual...
  • Page 71 – E-core Turbo Ratio Limit Ratio7 39 Efficient-core Turbo Ratio Limit Ratio7 defines the turbo ratio (max is 85 irre- spective of the core extension mode). The core range is defined in E-core Turbo Ratio Limit Numcore7. AIMB-508 User Manual...
  • Page 72 3.2.2.3.2 CPU VR Settings PSYS Slope  PSYS Slope defined in 1/100 increments. Range is 0-200. For a 1.25 slope, enter 125. 0=Auto. Users BIOS VR mailbox command 0x9. AIMB-508 User Manual...
  • Page 73 Acoustic Noise Settings  Configure Acoustic Noise Settings for IA, GT, and SA domains. Core/IA VR Domain  Core/IA VR Settings.   AIMB-508 User Manual...
  • Page 74 Core/IA VR Domain  – VR Config Enable [Enabled] VR Config Enable. IRMS [Disabled]  Enable/Disable IRMS – Current root mean square. AIMB-508 User Manual...
  • Page 75 GT VR Settings  GT VR Settings. RFI Settings  RFI Settings.   AIMB-508 User Manual...
  • Page 76  – RFI Current Frequency 139.200MHz – RFI Current Frequency 0 Set the desired RFI frequency, in increments of 100KHz. (For a frequency of 100.6MHz, enter 1006.) – FIVR Spread Spectrum [Enabled] – RFI Spread Spectrum [1.5%] AIMB-508 User Manual...
  • Page 77 3.2.2.3.3 Custom P-state Table Number of P states 0  Sets the number of custom P-states. At least 2 states must be present. AIMB-508 User Manual...
  • Page 78 3.2.2.3.4 GT – Power Management Control RC6(Render Standby) [Enabled]  Check to enable render standby support. Maximum GT frequency [Default Max Frequency]  Disable Turbo GT frequency [Disabled]  AIMB-508 User Manual...
  • Page 79 3.2.2.4 PCH-FW Configuration Configure Management Engine Technology Parameters. AIMB-508 User Manual...
  • Page 80 ME FW Image Re-Flash [Disabled]  Enable/Disable ME FW Image Re-Flash function. FW Update [Enabled]  OEM Key Revocation Configuration  Configure OEM. AIMB-508 User Manual...
  • Page 81 Anti-Rollback SVN Configuration  Configure Anti-Rollback SVN. 3.2.2.5 ACPI Settings System ACPI Parameters.   AIMB-508 User Manual...
  • Page 82 3.2.2.6 NCT6126D Super IO Configuration Set Parameters of Serial Port 1 (COMA). Serial Port 3 Configuration  Enable or Disable Serial Port (COM). AIMB-508 User Manual...
  • Page 83  Enable or Disable Serial Port (COM). Serial Port [Enabled] – Enable or Disable Serial Port (COM). – Device Settings: IO=220h; IRQ =7 – Change Settings [Auto] To select an optimal setting for serial port 5.   AIMB-508 User Manual...
  • Page 84 3.2.2.7 NCT6126D HW Monitor PC Health Status  Configure the digital I/O pins. Smart Fan Configuration  – CPU Fan Mode [SMART FAN IV Mode] – System Fan1 Mode [SMART FAN IV Mode] AIMB-508 User Manual...
  • Page 85 Digital I/O Configuration  Configure Digital I/O Pin.   AIMB-508 User Manual...
  • Page 86 3.2.2.8 S5 RTC Wake Settings Wake system from S5 [Disabled]  The item allows you enable or disable system wake up on alarm event.   AIMB-508 User Manual...
  • Page 87 3.2.2.9 S5 RTC Wake Settings Console Redirection [Disabled]  Console Redirection EMS [Disabled].  AIMB-508 User Manual...
  • Page 88 Serial Port 1 Configuration  Enable or Disable Serial Port (COM). – Serial Port [Enabled] – Device Settings: IO=3F8h; IRQ =4; – Change Settings [Auto] – Device Mode [RS2] AIMB-508 User Manual...
  • Page 89 Serial Port 3 Configuration  – Serial Port [Enabled] – Device Settings: IO=C80h; IRQ =5; – Change Settings [Auto] To select an optimal setting for serial port 3. AIMB-508 User Manual...
  • Page 90 Serial Port 4 Configuration  – Serial Port [Enabled] – Device Settings: IO=C88h; IRQ =7; – Change Settings [Auto] To select an optimal setting for serial port 4.   AIMB-508 User Manual...
  • Page 91 Serial Port 5 Configuration  – Serial Port [Enabled] – Device Settings: IO=C90h; IRQ =10; – Change Settings [Auto] To select an optimal setting for serial port 5. AIMB-508 User Manual...
  • Page 92 Serial Port 6 Configuration  Serial Port [Enabled] – Device Settings: IO=228h; IRQ =11; – Change Settings [Auto] To select an optimal setting for serial port 6.   AIMB-508 User Manual...
  • Page 93 3.2.2.10 PCI Subsystem Settings AIMB-508 User Manual...
  • Page 94 PCI Settings Common for all Devices  – Re-Size BAR Support [Enabled] If the system has Resizable BAR Capable PCIe Devices, this option Enables or Disables Resizable BAR Support. – BME DMA Mitigation [Disabled]   AIMB-508 User Manual...
  • Page 95 3.2.2.11 USB Configuration AIMB-508 User Manual...
  • Page 96  XHCI Hand-off [Enabled]  USB Mass Storage Driver Support [Enabled]  USB hardware delays and time-outs  USB Device transfer & reset time-out and delay setting. Mass Storage Devices  Shows USB mass storage device information. AIMB-508 User Manual...
  • Page 97 3.2.2.12 Network Stack Configuration 3.2.2.13 CSM Configuration CSM Support [Disabled]    AIMB-508 User Manual...
  • Page 98 3.2.2.14 NVMe Configuration 3.2.2.15 Tls Auth Configuration Server CA Configuration  Client Cert Configuration    AIMB-508 User Manual...
  • Page 99 3.2.2.16 Driver Health AIMB-508 User Manual...

  • Page 100: Chipset Configuration Setting

    Users can display a Chipset Setup option by highlighting it using the keys. All Chipset Setup options are described in this section. The Chipset Setup screens are shown below. The sub-menus are described on the following pages. AIMB-508 User Manual...
  • Page 101 3.2.3.1 Chipset Configuration Setting - System Agent (SA) Configuration VT-d [Enabled]  Disable or enable the VT-d function on MCH. AIMB-508 User Manual...
  • Page 102 3.2.3.1.1 Memory Configuration SIO Port 80 Control [Disabled]  CPU Warning Temperature [Disabled]  ACPI Shutdown Temperature [Disabled]  Case Open Warning [Disabled]  Wake On Ring [Disabled]  AIMB-508 User Manual...
  • Page 103 3.2.3.1.2 Graphics Configuration External Gfx Card Primary Display Configuration    AIMB-508 User Manual...
  • Page 104 LCD Control  – Backlight Signal Control [PWM] – Backlight Control PWM – Backlight PWM Frequency Control [23.3 KHz] AIMB-508 User Manual...
  • Page 105 3.2.3.1.3 Graphics Configuration DMI/OPI Configuration    AIMB-508 User Manual...
  • Page 106 DMI Advanced Menu  3.2.3.1.4 VMD Configuration Enable VMD controller [Disabled]  AIMB-508 User Manual...
  • Page 107 3.2.3.1.5 PCI Express Configuration M.2 Key M  PCIE X16_1  AIMB-508 User Manual...
  • Page 108 3.2.3.2 Chipset Configuration Setting – PCH-IO Configuration PCI Express Configuration  SATA Configuration  Security Configuration  HD Audio Configuration  AIMB-508 User Manual...
  • Page 109 3.2.3.2.1 PCI Express Configuration DMI Link ASPM Control [L1]  PCIe function swap [Enabled]  PCIe EQ settings  PCIe EQ override [Disabled]  AIMB-508 User Manual...
  • Page 110     AIMB-508 User Manual...
  • Page 111 3.2.3.2.2 SATA Configuration   AIMB-508 User Manual...
  • Page 112 3.2.3.2.3 Security Configuration RTC Memory Lock [Enabled]  BIOS Lock [Enabled]  Force unlock on all GPIO pads [Disabled]  AIMB-508 User Manual...
  • Page 113 3.2.3.2.4 HD Audio Subsystem Configuration Settings HD Audio [Enabled]  AIMB-508 User Manual...

  • Page 114: Security Settings

    Select this option and press to access the sub-menu, then type in the password. Set the Administrator password. User Password  Select this option and press to access the sub-menu, then type in the password. Set the User Password. Security Boot    AIMB-508 User Manual...

  • Page 115: Boot Setting

    Quiet Boot [Disabled]  If this option is set to disabled, the BIOS displays normal POST messages. If enabled, an OEM logo is shown instead of POST messages. Boot Option #1  Choose boot priority from boot device.   AIMB-508 User Manual...

  • Page 116: Save & Exit Configuration

    Select this option to quit Setup without making any permanent changes to the system configuration. 1. Select Reset Discarding Changes from the Exit menu and press <Enter>. The following message appears: Discard Changes and Exit Setup Now? [Ok] AIMB-508 User Manual...

  • Page 117: Mebx

    Select Restore Defaults from the Exit menu and press <Enter>. Save as User Default  Save the all current settings as a user default. Restore User Default  Restore all settings to user default values. 3.2.7 MEBx AIMB-508 User Manual...
  • Page 118 AIMB-508 User Manual...

  • Page 119: Software Introduction & Service

    Chapter Software Introduction & Service...

  • Page 120: Introduction

    Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life ® ® with Advantech platforms and Microsoft Windows embedded technology." We ® enable Windows Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, ®...
  • Page 121 CPU speed depending on the system loading. System Throttling This refers to a series of methods for reducing power con- sumption in computers by lowering the clock frequency. This API allows the user to adjust the clock from 87.5% to 12.5%. AIMB-508 User Manual...

  • Page 122: Software Utility

    The monitoring utility is a utility for customers to monitor system health in areas such as voltage, CPU and system temperature, and fan speed. These items are important to a device; if critical errors occur and are not solved immedi- ately, permanent damage may be caused. AIMB-508 User Manual...
  • Page 123 Chapter Chipset Software Installation Utility...

  • Page 124: Before You Begin

    Before You Begin To ensure problem-free installation of the enhanced display drivers and utility soft- ware, read the instructions in this chapter carefully. The drivers for AIMB-508 can be downloaded from the Advantech website. Updates are provided via Microsoft service packs.
  • Page 125 Appendix Pin Assignments...
  • Page 126 D-Sub Connector (VGA1) Table A.1: D-Sub Connector (VGA1) Signal Signal VCC (+5V) GREEN BLUE DDC DAT HSYNC Advantech define VSYNC DDC CLK AIMB-508 User Manual...
  • Page 127 ML_Lane 0+ TMDS Data2+ ML_Lane 0- TMDS Data2- ML_Lane 1+ TMDS Data1+ ML_Lane 1- TMDS Data1- ML_Lane 2+ TMDS Data0+ ML_Lane 2- TMDS Data0- ML_Lane 3+ TMDS Clock+ ML_Lane 3- TMDS Clock- AUX_EN# AUX+ AUX- HDMI_PWR DP_PWR AIMB-508 User Manual...
  • Page 128 Universal Serial Bus Port 5/6/7/8 (USB5678) Table A.3: Signal Signal VBUS VBUS Table A.4: Signal Signal VBUS VBUS AIMB-508 User Manual...
  • Page 129 RJ-45 + USB 3.2 Gen1 Stack Connector (LAN1_USB12) Table A.5: Signal Signal VBUS VBUS Table A.6: Signal Signal MDI_0+ MDI_2+ MDI_0- MDI_2- MDI_1+ MDI_3+ MDI_1- MDI_3- AIMB-508 User Manual...
  • Page 130 RJ-45 + USB 3.2 Gen1 Stack Connector (LAN2_USB34) Table A.7: Signal Signal VBUS VBUS Table A.8: Signal Signal MDI_0+ MDI_2+ MDI_0- MDI_2- MDI_1+ MDI_3+ MDI_1- MDI_3- AIMB-508 User Manual...

  • Page 131: Hd Audio Interface (Audio1)

    Table A.10: PCI Express x16 Slot (PCIEX16_1) Signal Signal +12V PRSNT1# +12V +12V +12V +12V SMB_CLK Reserved SMB_DATA Reserved Reserved +3.3V Reserved Reserved +3.3V +3.3VAUX +3.3V WAKE# PWRGD Reserved REFCLK+ TX0+ REFCLK- TX0- RX0+ Reserved RX0- DETECT# TX1+ Advantech defined TX1- AIMB-508 User Manual...
  • Page 132 TX4+ Reserved TX4- RX4+ RX4- TX5+ TX5- RX5+ RX5- TX6+ TX6- RX6+ RX6- TX7+ TX7- RX7+ Reserved RX7- TX8+ Reserved TX8- RX8+ RX8- TX9+ TX9- RX9+ RX9- TX10+ TX10- RX10+ RX10- TX11+ TX11- RX11+ RX11- TX12+ TX12- AIMB-508 User Manual...

  • Page 133: Front Panel Audio Header (Fpaud1)

    TX14- RX14+ RX14- TX15+ TX15- RX15+ Reserved RX15- Reserved Front Panel Audio Header (FPAUD1) Table A.11: Front Panel Audio Header (FPAUD1) Signal Signal MIC IN-L MIC IN-R FPAUD_DETECT# LINE OUT-R SENSE R1 SENSE LINE OUT-L SENSE R2 AIMB-508 User Manual...
  • Page 134 CLK33M_PCI2 REQ#1 GNT#2 CLK33M_PCI3 +3.3V_AUX REQ#2 RST# CLK33M_PCI1 GNT#0 REQ#0 PME# AD30 AD31 +3.3V AD29 AD28 AD26 AD27 AD25 AD24 +3.3V AD16 CBE#3 +3.3V AD23 AD22 AD20 AD21 AD19 AD18 +3.3V AD16 AD17 +3.3V CBE#2 FRAME# IRDY# AIMB-508 User Manual...
  • Page 135 CBE#0 +3.3V +3.3V REQ64#_PCI1 ACK64# A.10 Audio Amplifier Output Pin Header (AMP1) Table A.13: Audio Amplifier Output Pin Header (AMP1) Signal AMP OUT – R+ AMP OUT – R- AMP OUT – L- AMP OUT – L+ AIMB-508 User Manual...

  • Page 136: Hd Audio Interface (Spdif1)

    PCI Express x1 Slot (PCIEX1_1) Table A.15: PCI Express x1 Slot (PCIEX1_1) Signal Signal PRSNT1# +12V +12V +12V +12V +12V RSVD SMB_CLK RSVD SMB_DAT RSVD +3.3V +3.3V RSVD +3.3V +3.3V_AUX PWRGD WAKE# REFCLK+ REFCLK- TX0+ TX0- RX0+ RX0- AIMB-508 User Manual...
  • Page 137 Table A.15: PCI Express x1 Slot (PCIEX1_1) A.13 LVDS VESA, JEIDA Format Selection Pin Header (JLVDS_VCON1) Table A.16: LVDS VESA, JEIDA Format Selection Pin Header (JLVDS_VCON1) Signal +3.3V Advantech define AIMB-508 User Manual...
  • Page 138 LVDS_OD0- LVDS_ED0- LVDS_OD0+ LVDS_ED0+ LVDS_OD1- LVDS_ED1- LVDS_OD1+ LVDS_ED1+ LVDS_OD2- LVDS_ED2- LVDS_OD2+ LVDS_ED2+ LVDS_OCK- LVDS_ECK- LVDS_OCK+ LVDS_ECK+ LVDS_OD3- LVDS_ED3- LVDS_OD3+ LVDS_ED3+ LVDS ENBKL LVDS VCON Table A.18: EDP1 Signal Signal LVDS DETECT# EDP_TX2- EDP_TX2+ EDP_TX1- EDP_TX1+ EDP_TX0- EDP_TX0+ AIMB-508 User Manual...

  • Page 139: Edp/Lvds Backlight Inverter Power Connector (Inv1)

    EDP Panel/LVDS Panel Voltage Selection (JLVDS1) Table A.19: EDP Panel / LVDS Panel Voltage Selection (JLVDS1) Signal Signal +12V +3.3V A.16 EDP/LVDS Backlight Inverter Power Connector (INV1) Table A.20: EDP/LVDS Backlight Inverter Power Connector (INV1) Signal +12V BKL EN BKL CTRL AIMB-508 User Manual...

  • Page 140: Smbus Connector From Pch (Smbus1)

    SMBUS Connector from PCH (SMBUS1) Table A.21: SMBUS Connector from PCH (SMBUS1) Signal +5VSB SMB CLK SMB DAT A.18 Alarm Board / CMM Power Connector (VOLT1) Table A.22: Alarm Board / CMM Power Connector (VOLT1) Signal Signal +5VSB +3.3V -12V +12V AIMB-508 User Manual...

  • Page 141: Atx/At Mode Selection (Pson1)

    A.19 ATX/AT Mode Selection (PSON1) Table A.23: Function Jumper Setting ATX Mode (Default) AT Mode Table A.24: Signal +VCC A.20 Intel® ME Header (JME1) Table A.25: Intel® ME Header (JME1) Signal AZA_SDO_R +V3.3_DUAL AIMB-508 User Manual...
  • Page 142 Table A.27: Signal Pin Definition RTC RESET# A.22 COM3 RI# Selection Pin Header (JSETCOM3_V1) Table A.28: COM3 RI# Selection Pin Header (JSETCOM3_V1) Function Setting Jumper position for RI# (Default) Jumper position for +5V Jumper position for +12V AIMB-508 User Manual...

  • Page 143: Cmos Clear (Jcmos1)

    A.23 CMOS Clear (JCMOS1) Table A.29: CMOS Clear (JCMOS1) Signal RTC_RESET# A.24 Serial ATA Interface Connector (SATA1~4) Table A.30: Serial ATA Interface Connector (SATA1~4) Signal AIMB-508 User Manual...
  • Page 144 A.25 Coin Battery Connector (BAT1) Table A.31: Coin Battery Connector (BAT1) Signal VBAT A.26 Power LED Pin Header (JFP2) Table A.32: Power LED Pin Header (JFP2) Signal LED_PWR SUSLED AIMB-508 User Manual...

  • Page 145: Power Switch / Hdd Led / Smbus / Speaker Pin Header (Jfp1)

    Power Switch / HDD LED / SMBUS / Speaker Pin Header (JFP1) Table A.35: Function Jumper Setting Internal Buzzer (Default) Table A.36: Signal Signal HDD LED+ Power Button+ SPK_P2 HDD LED- Power Button- SPK_P3 SMB_DATA System Reset+ SPK_P4 SMB_CLK System Reset- AIMB-508 User Manual...
  • Page 146 Extended Power LED Pin Header (JFP4) Table A.38: Power LED Pin Header (JFP4) Signal LED_PWR SUSLED A.31 Universal Serial Bus 3.0 Port 11/12 (USB1112) Table A.39: Universal Serial Bus 3.0 Port 11/12 (USB1112) Signal Signal +5V_USB +5V_USB AIMB-508 User Manual...
  • Page 147 Table A.40: Universal Serial Bus 3.0 Port 13/14 (USB1314) Signal Signal +5V_USB +5V_USB A.33 SPI BIOS Flash Socket1 (SPI1) Table A.41: SPI BIOS Flash Socket1 (SPI1) Signal Signal MOSI MISO SCLK WP# / IO2 HOLD# / IO3 +V3.3_SPI AIMB-508 User Manual...
  • Page 148 Table A.42: SPI TPM Module Connector (For Optional TPM Module) (SPI_TPM1) Signal Signal RSVD SCLK MOSI MISO IRQ# PWRGD +3.3V_AUX A.35 SPI Pin Header (SPI_CN1) Table A.43: SPI Pin Header (SPI_CN1) Signal Signal +3.3V_AUX SCLK MISO MOSI AIMB-508 User Manual...
  • Page 149 A.36 Universal Serial Bus 2.0 Port 9/10 (USB910) Table A.44: Universal Serial Bus 2.0 Port 9/10 (USB910) Signal Signal +5V_USB +5V_USB A.37 Case Open Connector (JCASE1) Table A.45: Case Open Connector (JCASE1) Signal Case Open AIMB-508 User Manual...

  • Page 150: Atx 24-Pin Power Connector (Eatxpwr1)

    A.38 ATX 24-Pin Power Connector (EATXPWR1) Table A.46: ATX 24-Pin Power Connector (EATXPWR1) Signal Signal +3.3V +3.3V +3.3V -12V PSON# PWROK +5VSB +12V +12V +3.3V AIMB-508 User Manual...
  • Page 151 CTS# [4] DTR# [4] RI# [4] DCD# [5] DSR# [5] RXD [5] RST# [5] TXD [5] CTS# [5] DTR# [5] RI# [5] DCD# [6] DSR# [6] RXD [6] RST# [6] TXD [6] CTS# [6] DTR# [6] RI# [6] AIMB-508 User Manual...

  • Page 152: 8-Bit General Purpose I/O Pin Header (Gpio1)

    Signal GPIO0 GPIO4 GPIO1 GPIO5 GPIO2 GPIO6 GPIO3 GPIO7 VCC_GPIO A.42 COM2 Connector (COM2) Table A.50: COM2 Connector (COM2) Signal Signal DCD# [2] DSR# [2] RXD [2] RST# [2] TXD [2] CTS# [2] DTR# [2] RI# [2] AIMB-508 User Manual...
  • Page 153 Table A.51: System Fan #4 Connector (SYSFAN4/ SYSFAN3/SYSFAN2/ SYSFAN1) Signal SYSTEM FAN VCC SYSTEM FAN SPEED SYSTEM FAN PWM A.44 LED Port 80 Connector (LED_P80) Table A.52: LED Port 80 Connector (LED_P80) Signal LED_A LED_B LED_C LED_D LED_E LED_F AIMB-508 User Manual...
  • Page 154 Table A.53: CPU FAN Connector (CPUFAN1) Signal CPU FAN VCC CPU FAN SPEED CPU FAN PWM A.46 M.2 M-Key Connector (M2M1) Table A.54: M.2 M-Key Connector (M2M1) Signal Signal 3.3V 3.3V DAS/DSS# (I/O)/ LED1# 3.3V 3.3V 3.3V 3.3V PERn1 AIMB-508 User Manual...
  • Page 155 Connector Key Connector Key Connector Key Connector Key Connector Key SUSCLK(32kHz) (O)(0/3.3V) PEDET (NC- 3.3V 3.3V 3.3V A.47 ATX 8-Pin Main Power Connector (ATX12V1) Table A.55: ATX 8-Pin Main Power Connector (ATX12V1) Signal Signal +12V +12V +12V AIMB-508 User Manual...

  • Page 156: Com1 Connector (Com1)

    Table A.56: VGA1 Force on Pin Header (JFV1) Signal Advantech define A.49 COM1 Connector (COM1) Table A.57: COM1 Connector (COM1) Signal Signal DCD# [1] RXD [1] TXD [1] DTR# [1] DSR# [1] RST# [1] CTS# [1] RI# [1] AIMB-508 User Manual...
  • Page 157 AIMB-508 User Manual...
  • Page 158 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2024...

This manual is also suitable for:

Aimb-508hf-eaa1Aimb-508hl-0aa1

Table of Contents