Verifying A Successful Installation - Extreme Networks Alpine 3802 Hardware Installation Manual

Installing a BlackDiamond 6800 Series AC Power Supply
Figure 138: BlackDiamond 220 VAC power cable and plug
Wider prong
BD_220cord
Figure 139 shows the BlackDiamond 6800 series 110 VAC power cable and plug.
Figure 139: BlackDiamond 110 VAC power cable and plug
Wider prong
BD_110cord

Verifying a Successful Installation

After you supply power to the BlackDiamond switch, each MSM performs a power-on self-test (POST)
of its circuitry. The LED labeled "SYS" on the MSM blinks amber during the POST. After the MSM has
passed its POST and is operational, each I/O module performs its own POST.
NOTE
See Chapter 15, "BlackDiamond 6800 Series Management Switch Fabric Module" for more information
about switch management module LED activity and Chapter 16, "BlackDiamond 6800 Series I/O
Modules" for more information about I/O module LED activity.
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 245