System; Date And Time - Amcrest IP8M-VB2796EW User Manual

•
Record Mode: This set of radio buttons allows the user to designate the recording mode. The options are Auto,
Manual, and Off.
Record Stream: This dropdown box allows the user to specify which stream to record. The options are main stream
and sub stream.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
Cloud Storage
This menu redirects the user to the Amcrest Cloud web site. At this website (amcrestcloud.com) users can register for
new accounts as well as view or modify existing accounts.
For more information on Amcrest Cloud visit:

System

This menu section allows the user to change general settings for the camera.
General
This menu controls where general settings are configured. There are 2 tabs in this menu: General and Date & Time.
General
This tab is where the user can configure some basic camera settings.
Below is an explanation of the fields on the General settings tab:
•
Device Name: This field allows the user to change the device's name.
•
Language: This dropdown box allows the user to change the language used in the camera.
•
Video Standard: This dropdown box allows the user to select either the NTSC or PAL video standard.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
Date & Time
This tab is where the user can configure the date and time settings for the camera.
Below is an explanation of the fields on the Date & Time settings tab:
•
Date Format: This dropdown box allows the user to change the date format used in the camera.
•
Time Format: This dropdown box allows the user to change the time format used in the camera.
•
Time Zone: This dropdown box allows the user to change the time zone used in the camera.
•
Current Time: This field allows the user to enter in the date and time manually. Clicking the PC Sync button allows the
camera to sync with a Network Time Protocol (NTP) server.
•
Enable DST: This checkbox allows the user to enable daylight savings time for the camera.
•
DST Type: This radio button allows the user to select whether DST is based on the week, or a specific day.
•
Start Time: This dropdown box and field allow the user to enter in the start time for DST.
•
End Time: This dropdown box and field allow the user to enter in the end time for DST.
Synchronize with NTP: This checkbox allows the user to enable the camera's synchronization with an NTP server.
amcrestcloud.com
41