Amcrest IP8M-VB2796EW User Manual page 25

IP Filter
This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the camera. This
feature helps make the camera more secure by limiting remote access only to approved users.
Below is an explanation of fields on the IP Filter settings screen:
•
Trusted Sites: This checkbox allows the user to enable the IP Filter feature for trusted sites.
•
Add IP/MAC: This button opens a popup that allows the user to add IP or MAC addresses to the trusted site list. Note:
When accessing the camera externally, please add the MAC address of the router on the PC end.
•
Remove All: This button allows the user to remove all sites from the trusted IP/MAC list.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
SMTP (Email)
This screen allows for the configuring of email settings to permit the camera to send emails when an alarm is
triggered.
Below is an explanation of fields on the SMTP (Email) settings screen:
•
SMTP Server: SMTP stands for Simple Mail Transfer Protocol. This field allows the user to enter the SMTP server used
by the email service.
•
Port: This field allows the user to enter the port that corresponds to the selected SMTP server.
•
Login Anonymously: This checkbox allows the user to anonymously login to the server.
•
Username: This field allows the user to enter the SMTP username.
•
Password: This field allows the user to enter the password associated with the SMTP username.
•
Sender: This field allows the user to enter the sender email address. This email address will be the one that sends out
all emails pertaining to the alerts and alarm emails sent by the camera.
•
Authentication: This dropdown box allows the user to select an encryption type. There are two types of email
encryption protocols that are available.
•
SSL: Secure Socket Layer
•
TLS: Transport Layer Security
•
Subject: This field allows the user to define the subject line of the email that is sent to the receivers.
•
Recipients: This field allows the user to enter the receiver email address. These email addresses are the ones that will
receive any emails pertaining to alert and alarm emails sent by the camera. Up to 3 email addresses can be entered in
this field.
Interval: This field allows the user to define, in seconds, how long the system should wait between sending emails.
This prevents multiple emails from being sent out.
•
Keep Alive: This checkbox allows the user to enable a function to periodically check in with the SMTP server to ensure
it can connect correctly.
•
Test: This button causes the system to automatically send out an email to test the connection is OK or not. Prior to the
email test, please save the email setup information.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
25