Encore ENH-WI-3GN3 User Manual page 81

This page allows you to save the current router configurations. When you save the
configurations, you also can restore the saved configurations into the router through the
Restore Settings. If extreme problems occur you can use the Restore to Factory
Defaults to set all configurations to its original default settings. Warning: You will loose any
saved data and settings when you set back to the manufacturer's default settings, but you
can re-enter your previous settings manually.
Backup Settings: This can save the current Broadband router configuration to a file
named "config.bin" on your PC. You can also use the <Upload> button to restore the
saved configuration to the Broadband router. Alternatively, you can use the "Restore to
Factory Defaults" tool to force the Broadband router to perform a power reset and restore
the original factory settings.
You can reset the broadband router when system stops responding correctly or stop
functions.
Back-up Tab
Reset Tab
80
www.encore-usa.com