Encore ENH-WI-3GN3 User Manual page 54

WPS Tab - Push Button Wireless Connection
Push Button Wireless Connection is the simplest way to establish a connection between
the wireless clients and the wireless router. You don't have to select the encryption mode
and fill in a long encryption passphrase every time when you try to setup a wireless
connection. You only need to press a button on both wireless client and wireless router, and
the WPS will do the rest for you.
The wireless router supports two types of Push Button Wireless Connection, the Push
Button and PIN code. If you want to use the Push Button, you have to push a specific button
on the wireless client or in the utility of the wireless client to start the Push Button Wireless
Connection mode, and switch the wireless router to Push Button Wireless Connection
mode. You can simply push the push button of the wireless router, or click the 'Start to
Process' button in the web configuration interface. If you want to use the PIN code, you
have to know the PIN code of the wireless client and switch it to Push Button Wireless
Connection mode, then fill-in the PIN code of the wireless client through the web
configuration interface of the wireless router.
53
www.encore-usa.com