Encore ENH-WI-3GN3 User Manual page 64

Port Mapping allows you to re-direct a particular range of service port numbers (from the
Internet / WAN Port) to a particular LAN IP address. It helps you to host servers behind the
router NAT firewall.
Enable Port Mapping: Enable or disable port mapping function.
Description: description of this setting.
Local IP: This is the local IP of the server behind the NAT firewall.
Protocol: This is the protocol type to be forwarded. You can choose to forward "TCP" or
"UDP" packets only, or select "BOTH" to forward both "TCP" and "UDP"
packets.
Port Range: The range of ports to be forward to the private IP.
Port Mapping Tab
63
www.encore-usa.com