Installing The Replacement Chassis - Cisco 12416 Replacement Instructions Manual

Tilt the safety hand truck onto its outrigger wheels to move the chassis to a level, open space with a solid
Step 8
floor, where the chassis can be repackaged for shipping.
If you plan to return the defective chassis to the factory, repackage it in the original shipping container
or a replacement shipping container acquired from Cisco. For information on repackaging the chassis,
see the
and the

Installing the Replacement Chassis

Procedures for installing the replacement chassis are described in the following sections:
•
•
•
•
•
Positioning the Replacement Chassis for Insertion into the Rack
Position the replacement chassis and scissor-jack platform in front of the rack with the back panel of the
chassis facing the rack opening, and the back of the scissor-jack platform butted against the
rack-mounting platform in the rack. (See
Figure 9
platform (closed)
78-16082-01
"Reinstalling the Chassis and Scissor-Jack Platform in the Shipping Pallet" section on page 23
"Packaging the Replaced Chassis for Shipment" section on page
Positioning the Replacement Chassis for Insertion into the Rack, page 15
Inserting the Chassis into the Rack, page 16
Reattaching Supplemental Bonding and Grounding Connections, page 20
Reattaching the Vertical Cable-Management Troughs, page 21
Completing the Installation, page 21
Positioning the Chassis to Insert It into the Rack
Front panel
of chassis
Scissor-jack
Cisco 12016, Cisco 12416, and Cisco 12816 Router Chassis Replacement Instructions
Figure 9.)
Rear panel
of chassis
Rack-mounting
Removing and Installing the Chassis
23.
Rack
platform
15