Cisco 12416 Replacement Instructions Manual page 20

Removing and Installing the Chassis
Reattaching Supplemental Bonding and Grounding Connections
Figure 14
on either side of the switch fabric card cage on the front of the chassis.
supplemental bonding and grounding cable lug to one of the receptacles on either side of the top of the
power interface panel on the back of the chassis.
Figure 14
Air filter door
Figure 15
Cisco 12016, Cisco 12416, and Cisco 12816 Router Chassis Replacement Instructions
20
shows how to attach a supplemental bonding and grounding cable lug to one of the receptacles
Router Front Bonding and Grounding Receptacles
Router Top Bonding and Grounding Receptacles
Supplemental
bonding and
grounding
receptacle
Figure 15 shows how to attach a
NEBS
supplemental
earth ground
receptacle
78-16082-01