Cisco 12416 Replacement Instructions Manual page 14

Removing and Installing the Chassis
Figure 7
Front of
chassis
With one person positioned on the side of the chassis to prevent it from tipping, use the 3/4-inch (19-mm)
Step 6
socket and ratchet wrench to turn the scissor-jack screw clockwise slowly and close the scissor-jack
platform to lower the chassis. (See
Figure 8
Front of chassis
Scissor-jack
screw
Counter-clockwise
expands platform
Position the safety hand truck at one side of the chassis, slide the chassis and scissor-jack platform onto
Step 7
the safety hand truck, and secure the chassis to the hand truck with the locking safety strap.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Chassis Replacement Instructions
14
Securing the Chassis to the Scissor-Jack Platform
Figure
Closing the Scissor-Jack Platform to Lower the Chassis
8.)
Chassis anchor
clip and bolt
(2 on each side)
Clockwise
closes platform
Scissor-jack
platform
78-16082-01