Cisco 12416 Replacement Instructions Manual page 19

Figure 13
Hold the chassis in position against the mounting flanges on the rack and have a second person insert
Step 7
and loosely tighten one of the mounting screws provided.
On the other side of the chassis, adjust the position of the chassis so that the same mounting hole in the
Step 8
bottom group of mounting holes (group A) is aligned with a hole in the mounting flange on the rack,
then insert and loosely tighten one of the mounting screws provided.
Repeat
Level the chassis as required, then secure the chassis to the equipment rack by tightening all ten screws
Step 9
(five on each side of the chassis).
78-16082-01
Chassis Mounting Hole Groups
Step 6 through Step 8 for mounting hole groups B through E.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Chassis Replacement Instructions
Removing and Installing the Chassis
Chassis mounting
holes group E
Chassis mounting
holes group D
Chassis mounting
holes group C
Chassis mounting
holes group B
Chassis mounting
holes group A
19