Download Print this page

cecotec CONGA 7490 ULTIMATE GENESIS Instruction Manual page 47

Robot vacuum cleaner
Hide thumbs Also See for CONGA 7490 ULTIMATE GENESIS:

Advertisement

Available languages

Available languages

  • ENGLISH, page 39
ENGLISH
Standby
-
The robot vacuum cleaner will automatically enter standby mode after 10 minutes
of inactivity.
-
Press the Start/Pause button on the robot vacuum cleaner or in the app to activate it again.
Cleaning modes
-
The robot vacuum cleaner includes different modes and functions that can be
toggled from the app.
-
In addition, in every one of the cleaning modes on the app, you will be able to select
the Turbo mode on carpets, which activates the maximum suction power when the
robot vacuum cleaner detects a carpet.
Edge mode
-
When this mode is selected, the robot vacuum cleaner will clean along walls and
around furniture (e.g., table or chair legs). 
-
Press the edge cleaning mode in the app. 
Spiral mode
-
When this mode is enabled, the robot vacuum cleaner will thoroughly clean a specific
area. It will start cleaning at a specific spot and will move outwards in a spiral motion, and
it will return to the starting spot in an inwards spiral motion again.
-
When it finishes and returns to the starting spot, the robot vacuum cleaner will return
to the charging base directly.
-
Before using this mode, place it in the spot you wish to clean.
-
Select the spiral cleaning mode on the app.
Square Spiral mode
-
When this mode is enabled, the robot vacuum cleaner will thoroughly clean a specific
area. It will start cleaning at a specific spot and will move outwards in a square-spiral
motion, and it will return to the starting spot in an inwards square-spiral motion. 
-
When it finishes and returns to the starting spot, the robot vacuum cleaner will return
to the charging base directly.
-
Before using this mode, place it in the spot you wish to clean.
-
Select the spiral cleaning mode on the app.
Scrubbing mode
1. Attach the mop to the bracket and the latter to the mixed tank. Fill up the water tank.
2. Insert the mixed tank into the robot vacuum cleaner and select the cleaning mode
and scrubbing level in the application: off, low, medium, or high.
3. Once you have selected the desired scrubbing level, the robot vacuum cleaner will start
the All in One function to vacuum, scrub, and sweep simultaneously thanks to its mixed
tank.
45

Advertisement

loading
Need help?

Need help?

Do you have a question about the CONGA 7490 ULTIMATE GENESIS and is the answer not in the manual?