Table of Contents
Advertisement
Ad-Hoc wireless workgroup, set the same wireless channel and
SSID to match with the computer's configuration.
Click Site Survey to display the available wireless networks, so that
you can easily connect to one of the listed wireless networks.
- Wireless Mode: Select the type of wireless communication for the
camera: Infrastructure or Ad-Hoc.
- Channel: Select the appropriate channel from the list.
- Authentication: Select the authentication method to secure the
camera from being used by unauthorized user: Open, Shared-key,
WPA-PSK, and WPA2-PSK. The following table explains the four
options:
Open
Shared-key
WPA-PSK/
WPA2-PSK
If you select Open or Shared-key as the Authentication mode, you
need to complete the following settings:
Encryption: Select the WEP option to enable the data
encryption feature to secure the camera within the wireless
network.
Format: Once you enable the Encryption feature, you need to
determine the encryption format by selecting ASCII or HEX.
ASCII format causes each character you type to be interpreted as
an eight-bit value. Hex format causes each pair of characters you
The default setting of Authentication mode, which
communicates the key across the network.
Allow communication only with other devices with
identical WEP settings.
WPA-PSK/WPA2-PSK is specially designed for the
users who do not have access to network
authentication servers. The user has to manually
enter the starting password in their access point or
gateway, as well as in each PC on the wireless
network.
- 38 -
Advertisement
Table of Contents
