Table of Contents
Advertisement
- DHCP: Select this option when your network uses the DHCP server.
When the camera starts up, it will be assigned an IP address from
the DHCP server automatically.
- Static IP: Select this option to assign the IP address for the camera
directly. You can use IPSetup to obtain the related setting values.
IP
Subnet Mask
Default Gateway
Primary/
Secondary DNS
- PPPoE: Select this option when you use a direct connection via the
ADSL modem. You should have a PPPoE account from your
Internet service provider. Enter the User Name and Password. The
camera will get an IP address from the ISP as starting up.
NOTE
Once the camera get an IP address from the ISP as starting up, it
automatically sends a notification email to you. Therefore, when
you select PPPoE as your connecting type, you have to set up the
email or DDNS configuration in advance.
DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and
domain name to a dynamic Internet IP address. Select the Enable
option to enable this feature. Then, select the Provider from the pull-
down list and enter the required information in the Host Name, User
Name, and Password boxes. Please note that you have to sign up for
DDNS service with the service provider first.
Enter the IP address of the camera. The default
setting is DHCP.
Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Enter the Default Gateway of the camera. The
default setting is
DNS (Domain Name System) translates domain
names into IP address. Enter the Primary DNS
and Secondary DNS that are provided by ISP.
- 34 -
your router's LAN IP
address.
Advertisement
Table of Contents
