Converters.TV 899 Operation Manual page 2

Introduction
The DisplayPort (DP) 1 by 4 splitter allows a single DP source to be displayed on four
DP input monitors simultaneously. It supports video resolution up to 2560 x 1600 and
audio up to PCM 7.1 Providing a fast switch time between source and display
monitors by saving monitor EDID data to allow the image to display properly. The DP
1 by 4 splitter is an ideal device for your DP source to multi display requirements.
Features
Applications
System
Requirements
Supports DisplayPort specification v1.1a
●
Deep color video up to 12bit, resolution support up to 2560 x 1600
●
Supports audio up to PCM 7.1(32-192kHz Fs sample rate)
●
Supports pixel component format with RGB; YCbCr 4:2:2; YCbCr 4:4:4
●
Color space conversion between RGB and YCbCr color space
●
Supports 1.62/2.7 Gbps data rate (Low/High bit rate)
●
Supports flexible 1/2/4 lanes configurations; Full 10.8Gbps data rate support (4lanes
●
at 2.7Gbps)
Supports EDID switch and setting
●
*Note: This device supports only DisplayPort mode, it cannot connect
DP to HDMI level shift convert.
Multi DisplayPort monitor display
●
Information sharing
●
Advertising program
●
DisplayPort output source equipment.
●
DisplayPort input monitors.
●