Configuring the Switch
The TPE-224WS 28-Port 10/100/1000Mbps Gigabit Ethernet Web
Smart PoE Switch has a Web GUI interface for smart switch
configuration. The Switch can be configured through the Web
Browser. A network administrator can manage, control and monitor
the switch from the local LAN. This section indicates how to
configure the Switch to enable its smart functions
Login
Before you configure this device, make sure your computer is on the
same subnet as the Web Smart PoE Switch. For example, since the
default IP address of the Web Smart PoE Switch is 192.168.0.1, then
the computer should be set at 192.168.0.x (where x is a number
between 2 and 253), and the default subnet mask is set to
255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address
http://192.168.0.1
(the factory default IP address
setting) into the address bar.
25