C
ONFIGURING
This Switch is a "Smart" switch.
administration parameters allow the Switch to operate more
effectively than unmanaged (dumb) switches. This chapter will
describe how to configure the Switch.
Configuration via Serial Port
The Switch is accessible using a terminal or terminal emulator
attached to the RS-232 serial port on the Switch.
The console port is set at the factory for following configuration:
?? Baud rate:
?? Data width:
?? Parity:
?? Stop bits:
?? Flow control:
Make sure the terminal or PC you are using to make this
connection is configured to match these settings.
T
S
HE
WITCH
23
The programmable
9,600
8 bits
none
1
None