Figure 13. Port Setting
Note: The priority of Gigabit Fiber port is higher than Copper.
Speed:
The 1~24 100BASE-TX port connections can operate in Forced Mode
settings (100M Full, 100M Half, 10M Full, 10M Half), Auto, or
Disable. The default setting for all ports are Auto.
The 25~28 1000BASE-T port connections can operate in Forced
Mode settings (1000M Full, 100M Full, 100M Half, 10M Full, 10M
Half), Auto, or Disable. The default setting for all ports are Auto.
The 25~26 Mini-GBIC (Gigabit Fiber) connections can operate in
Forced Mode settings (1000M Full), Auto, or Disable
QoS:
Displays each port's 802.1p QoS priority level for received data
packet handling. Default setting for all ports is Middle. You can
change the priority settings in 802.1p Default Priority.
29