Toolbar; Configuring The Switch; Login - TRENDnet TEG-160WS User Manual

Toolbar

The toolbar in the Web Management Utility have four main tabs, File,
View, Options and Help.
In the "File TAB", there are Monitor Save, Monitor Save As, Monitor
Load and Exit.
Monitor Save: To record the setting of the Monitor List to the
default, when you open the Web Management Utility next
time, it will auto load the default recorded setting.
Monitor Save As: To record the setting of the Monitor List in
appointed filename and file path.
Monitor Load: To manually load the setting file of the
Monitor List.
Exit: To exit the Web Management Utility.
In the "View TAB", there are view log and clear log function, this
function will help you to show trap setting.
View Log: To show the event of the Web Management Utility
and the device.
Clear Log: to clear the log.
In the "Option TAB", there are Refresh Time function, this function
helps you to refresh the time of monitoring the device. Choose 15
secs, 30 secs, 1 min, 2 min and 5 min to select the time of monitoring.
In the "Help TAB", there is About function, it will show out the
version of the Web Management Utility.
25

Configuring the Switch

The TEG-160WS 16-Port Gigabit Web Smart Switch has a Web GUI
interface for smart switch configuration. The Switch can be
configured through the Web Browser. A network administrator can
manage, control and monitor the switch from the local LAN. This
section indicates how to configure the Switch to enable its smart
functions

Login

Before you configure this device, note that when the Web Smart
Switch is configured through an Ethernet connection, make sure the
manager PC must be set on same the IP network. For example, when
the default network address of the default IP address of the Web Smart
Switch is 192.168.0.1, then the manager PC should be set at
192.168.0.x (where x is a number between 2 and 253), and the default
subnet mask is 255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address http://192.168.0.1
setting) to the address location.
(the factory-default IP address
Figure 12.
26