Add Item: To add a device to the Monitor List manually, enter the IP
Address of the device that you want to monitor.
Delete Item: To delete the device in the Monitor List.
Device Setting
Configuration Setting: Under Configuration Setting, you can set the
IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),
System name, Location and DHCP function.
Select the device in the Discovery list or Monitor List and click
Configure Settings. The Configuration Setting window will appear (
Figure 10). After making the desired changes, enter the password
and click "Set". The default password is "admin".
Figure 9. Configuration Setting
Password Change: This option allows you to change the password,
Enter the original password, the new password, confirm the new
password and click "Set".
22