Configuring The Power Over Ethernet (Poe) Switch; Web Browser - TRENDnet TPE-80WS Quick Installation Manual

3. Configure the Power Over Ethernet (PoE) Switch
Note: It is recommended that you configure the PoE Switch from a wired
computer. Before the PoE Switch can be configured, a Static IP address must
be assigned to your computer's network adapter in the subnet of
192.168.223.x. Since the PoE Switch's default IP address is 192.168.223.100,
make sure no other network devices are assigned an IP address of
192.168.223.100. (Refer to Troubleshooting section on how to configure
TCP/IP settings on your PC.)

Web Browser

1. Open your web browser, type
http://192.168.223.100 in the
Address bar, and then press Enter.
2. Enter the Password, and then click
Apply. By default:
Password: admin
3. Click Configuration and then click
System. Configure the IP
Address, Subnet Mask and
Gateway to match your network
and then click Apply.
For detailed information regarding the TPE-80WS's configuration and
advanced settings, please refer to the Troubleshooting section, User's
Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
Your installation is now complete.
Register Your Product
Thank you for choosing TRENDnet
English
www.trendnet.com/register
3